Reload help please

Tom102938

Well-Known Member
Hi all,

Just seeing if there is an equation or something out there that will me figure out how many rounds i should be getting out of a 1kg tub of powde.

I will be looking to reload .270 Barnes TTSX in 110g

Any advice would be most welcome.

Thanks
 
There are 15432 grains in 1000 grams.

So if for example you are putting 60grains of powder in your .270 cases, you just want to know how many 60 grains there are in 15432grains. You divide 15432 by 60 and the answer is approximately how many cases you will be able to load from 1000grams (1kg) of powder. Which is about 257 reloads.
 
There are 15432 grains in 1000 grams.

So if for example you are putting 60grains of powder in your .270 cases, you just want to know how many 60 grains there are in 15432grains. You divide 15432 by 60 and the answer is approximately how many cases you will be able to load from 1000grams (1kg) of powder. Which is about 257 reloads.
thank you for the metric version of the equation.
 
if you are firing 200 factory rounds a year ,yes you will save money BUT NOT BY MUCH ! by the time you have purchased your reloading kit <£200/£300> depending on the kit, powder £130+ a kilo, primers £100/£150 1000 <depending on the make> cases i assume you keep your once fired cases. then there is the time it takes to clean and prep cases, reprime ,measure the powder, seat a bullet to your desired length. range testing etc to find they dont group so back to reloading the now 2x fired cases, clean prep new primer, different powder charge new bullet ,retry for group etc add info-nitem. find a cheaper supplier of factory ammo !
 
if you are firing 200 factory rounds a year ,yes you will save money BUT NOT BY MUCH ! by the time you have purchased your reloading kit <£200/£300> depending on the kit, powder £130+ a kilo, primers £100/£150 1000 <depending on the make> cases i assume you keep your once fired cases. then there is the time it takes to clean and prep cases, reprime ,measure the powder, seat a bullet to your desired length. range testing etc to find they dont group so back to reloading the now 2x fired cases, clean prep new primer, different powder charge new bullet ,retry for group etc add info-nitem. find a cheaper supplier of factory ammo !
Understand this, but when you live in the middle of no where with very few shops that sell ammunition then I kind of have to look at different options. I know the initial payment of the kit will be an outlay but after say 3 years of making the 200-300 rounds then it will have paid itself.

My plan was to make it as close as i can to the factory ammo.
 
270 in stock. The cheapest way to reload.
 
Reloading kit is a capital expense. You buy it once use it for many years and can probably sell it for more than you bought it. I bought all my kit 2nd hand 15 years ago for £100. I could stick on SD and get at least that back today.

Once you are set up you have the certainty of consistent ammo for at least 200 odd rounds. Of course how you many you use up perfecting a load vs actual hunting is really up to you. You can develop a hunting load with about 20 odd cartridges - certainly a load that is more than adequate for most hunting needs. You can of course go through a lot of powder, primers and bullets chasing tiny little groups and gain huge satisfaction in that.

It doesn’t take long to reload 40 cartridges. Unless your gun-shop is next door or on a regular journey, a trip to buy a box or two of ammo will take two hours. You can easily have a couple of boxes loaded up in that time. I tend to run about 200 cases - I through my empties in a jar. When it gets full, I deprime and resize them all in one session. Takes about an hour. Into the dishwasher to give them a good clean.

Then as and when I need ammo I load a batch of 40 cartridges.
 
Last edited:
Thanks all, appreciate it.

Just trying to work out if reloading if going to be cheaper in the long run, as I'm currently paying £75 for 20 rounds and going through quite a lot of them
.270 isn't a common target round, so I'm going to take a guess that you're not going to be shooting hundreds a year? With that in mind, I'd base your decision to reload on whether the circa £500 outlay on equipment will offset your factory ammunition costs? If you want to take reloading as an extension to shooting as a hobby though, the economics don't really make any sense.
 
Thanks all, appreciate it.

Just trying to work out if reloading if going to be cheaper in the long run, as I'm currently paying £75 for 20 rounds and going through quite a lot of them !
No you are going to spend the same amount of your salary on shooting but get a slightly more bang for the bucks.
 
.270 isn't a common target round, so I'm going to take a guess that you're not going to be shooting hundreds a year? With that in mind, I'd base your decision to reload on whether the circa £500 outlay on equipment will offset your factory ammunition costs? If you want to take reloading as an extension to shooting as a hobby though, the economics don't really make any sense.
Shout around 200 this year but will only rise.

Going to start scanning ebay and see what I can get 2nd hand
 
Back
Top