Reloading Barnes TTSX 7 mm Rem Mag

[2teal]

Does anyone have any experience / recipes regarding reloading Barnes 140 Gr TTSX for 7 mm Rem Mag ?

The rifle is a TIKKA T3 VARMINT STAINLESS, 600 mm (23 3/4") Barrel - rate of twist 1 in 9.5"

BARNES TIPPED TSX 7MM 140 GR TTSX BT (30300)

Powder recommendations / load data / performance on Reds, would be most welcomed.

Many thanks,

2teal

 

[Sakoodin1]

I use the 139grn lrx in my 7mm!!! Best copper bullet by far for the 7mm rem mag but if you have the ttsx then follow this and you won’t go far wrong

 

[2teal]

I use the 139grn lrx in my 7mm!!! Best copper bullet by far for the 7mm rem mag but if you have the ttsx then follow this and you won’t go far wrong

Thanks Sakoodin1, which powder are you using with the 139's ?

 

[Sakoodin1]

I use r/l 22 mate

 

[Utectok]

I use the 139grn lrx in my 7mm!!! Best copper bullet by far for the 7mm rem mag but if you have the ttsx then follow this and you won’t go far wrong

Have you tried these Yew Tree Fieldsports TLR 7mm Bullets 130grains
In my experience better than lrx

 

[Sakoodin1]

Have you tried these Yew Tree Fieldsports TLR 7mm Bullets 130grains
In my experience better than lrx

I will have a Google at them mate thanks If they beat the lrx they must be good I cant say enough about the lrx like

 

[Utectok]

I will have a Google at them mate thanks If they beat the lrx they must be good I cant say enough about the lrx like

Lrx is a good bullet but I think you will find these are easier to get shoot tighter groups and have better terminal performance at range.

 

[Sakoodin1]

Lrx is a good bullet but I think you will find these are easier to get shoot tighter groups and have better terminal performance at range.

That’s very much for the info I will check them out definitely