Roll pin bench block/puck.

[The Burpster]

Watched a YT vid a while ago and the guy doing a trigger had like a Puck with holes in to rest the body on and tap the pins into various size holes in the puck.
Anyone print these up or, know where I can get one without having to buy a whole pin punch set?

 

[takbok]

A block of wood with some suitable holes drilled in it would also work.

 

[Tim.243]

Watched a YT vid a while ago and the guy doing a trigger had like a Puck with holes in to rest the body on and tap the pins into various size holes in the puck.
Anyone print these up or, know where I can get one without having to buy a whole pin punch set?

A Rory said, decent bit of hard timber and look for Starrett/Moore & Wright/ Blue point but not Made in China

Often made pin punches from silver steel then H&T just twiddle it on the grinder to size.

 

[The Burpster]

Just found wood a bit soft sometimes when you have to give the pin “that” tap to loosen it and it ends up squishing it…..
Also unless its some exotic hardwood (that I haven’t access to) it then leaves an impression of the larger object in it rendering it unlikely to be useful again?

 

[Smellydog]

I cut a piece of plastic bar and drilled holes in it.

 

[MarinePMI]

Amazon usually carries a wide variety of them...

Amazon.com : bench gun block

 

[The Burpster]

Amazon usually carries a wide variety of them...

Amazon.com : bench gun block

You sir are a bloody genius! You found it! Its a Wheeler one I saw! Now just gotta find one!

 

[The Burpster]

I cut a piece of plastic bar and drilled holes in it.

Like 50mm diameter plastic bar isn’t something I come across that often……

 

[The Burpster]

Now I know what to search for gonna order 2 100mm square polymer bench blocks from Temu for a fiver and drill some holes in - one at home one in range box.

£70 for a Wheeler one my Fat wrench only cost a bit more than that……

 

[Smellydog]

Like 50mm diameter plastic bar isn’t something I come across that often……

50mm Round Delrin Acetal black plastic bar ends | eBay

Find many great new & used options and get the best deals for 50mm Round Delrin Acetal black plastic bar ends at the best online prices at eBay! Free delivery for many products.

www.ebay.co.uk

 

[The Burpster]

Why didnt I think of that? Thank you. Trigger pulled.

 

[Tim.243]

Like 50mm diameter plastic bar isn’t something I come across that often……

Guess your man cave needs a re-stock lol
There is a nice piece of 120x120x50 Nylon 66 laying under the bench with bits of hardwood and a 4kg block of lead but who's counting.

 

[MarinePMI]

Like 50mm diameter plastic bar isn’t something I come across that often……

If you can find it, vulcanized rubber blocks work better.

 

[GGG]

If you know someone with a 3D printer, they’re pretty easy to download and make. Mines still going strong after a few years now, like the blue one here.

 

[The Burpster]

If you know someone with a 3D printer, they’re pretty easy to download and make. Mines still going strong after a few years now, like the blue one here.

Just dumped on my mate…….

 

[takbok]

Cheapish ones on eBay:

Bench Block Industrial Tools for Punch Punching Rollpins Gunsmith | eBay

 

[Edinburgh Rifles]

buy a hockey puck on amazon and drill holes in it
much cheaper

 

[doigan]

Bought one from AliExpress only about £4

 

[B&W FOX]

I use indoor roller hockey puks.
If your down at Bisley upstairs in the NSRA building there's a indoor roller hockey shop and a hall where they play.
Another piece of useless information