Two stainless synthetic Sako 75's and a Sauer drilling up for grabs. I need to thin my collection down a bit, I'm not getting out as much as I was. Please ask for photos if you're genuinely interested, life's really busy at the moment and I want to see if I get any interest before I go to the effort of getting them out of the safe and taking a load of pictures!
.300WSM with 20" sporter weight barrel, round count approximately 100, screwcut M14x1. Ceracoated. Very good condition, £1100 or £1200 with DPT magnum moderator.
.375H&H Magnum with 24" sporter weight barrel, Round count approximately 200, screwcut M14x1. Ceracoated. Very good condition, £1200
16g/8x60R JP Sauer drilling. Pretty tidy for a gun made in 1943. Something that is rare for one of these, it comes with the original claw mounts to fit a scope. They usually get lost and cost an absolute fortune to have hand fitted to the bases! I have extensive knowledge of the history of the gun, the rifle barrel was unfired until I bought it and has had a couple of dozen down it since. Ammunition for the rifle barrel isn't commercially available as far as I'm aware but it's easily made using Hornady 7.3x74R brass. No messing about needed, shove it through the sizing die, cut to length and reload as normal using 8x57 load data. I've got a bit of brass, some bullets and dies that I'm happy to include with the gun, and I'm looking for £1500 please.
I can RFD these at cost. I have some brass, dies, bullets and ammunition for both of the Sako rifles and we can negotiate a price for them if you're interested. Please message for more information and I'll try to get back to you as quickly as possible.
.300WSM with 20" sporter weight barrel, round count approximately 100, screwcut M14x1. Ceracoated. Very good condition, £1100 or £1200 with DPT magnum moderator.
.375H&H Magnum with 24" sporter weight barrel, Round count approximately 200, screwcut M14x1. Ceracoated. Very good condition, £1200
16g/8x60R JP Sauer drilling. Pretty tidy for a gun made in 1943. Something that is rare for one of these, it comes with the original claw mounts to fit a scope. They usually get lost and cost an absolute fortune to have hand fitted to the bases! I have extensive knowledge of the history of the gun, the rifle barrel was unfired until I bought it and has had a couple of dozen down it since. Ammunition for the rifle barrel isn't commercially available as far as I'm aware but it's easily made using Hornady 7.3x74R brass. No messing about needed, shove it through the sizing die, cut to length and reload as normal using 8x57 load data. I've got a bit of brass, some bullets and dies that I'm happy to include with the gun, and I'm looking for £1500 please.
I can RFD these at cost. I have some brass, dies, bullets and ammunition for both of the Sako rifles and we can negotiate a price for them if you're interested. Please message for more information and I'll try to get back to you as quickly as possible.
