Sako Finnfire P94S mag for under a fiver?

[Maelstrom]

Four 5 shots please.

 

[Maelstrom]

Sounds amazing

 

[Alantoo]

Very good. Recommended, mine are working well.

Alan

 

[night stalker]

Hi are you still making the 10 shot one and if you are how much are they posted please

thanks Rick

 

[spandit]

Actually working on an even longer magazine at the moment, just for kicks, really.

 

[1066]

How's the 50 shot drum magazine with the clockwork spring coming along Spandit?

 

[spandit]

How's the 50 shot drum magazine with the clockwork spring coming along Spandit?

I'm struggling of a way to make the belt links and not 100% sure of the legality or practicality of making it fully auto...

 

[spandit]

Here's the 13 round mag - haven't tested it yet and I suspect the spring will not be strong enough but it's designed using new software and the base is compatible with the factory magazines. I don't know what the limit is as at some point the spring will need to be so strong that it will probably push the follower through the top of the magazine. I have some thicker wire - could see what's possible...

 

[Bat22]

Spanit. Read this thread with interest as just about to pickup a 94s. Are you still printing the 10 round mags? If so can I get a couple?
cheers

 

[spandit]

Spanit. Read this thread with interest as just about to pickup a 94s. Are you still printing the 10 round mags? If so can I get a couple?
cheers

Yes and no. I've had some returns due to the spring going weak. Not solved this yet

 

[Bat22]

Yes and no. I've had some returns due to the spring going weak. Not solved this yet

Thanks for update. Spring sounds like a difficult problem to solve. I’ll wait for your next update. Cheers.

 

[spandit]

Making a bit of progress. I wound a spring to the correct length. I then compressed it, both repeatedly and left overnight. It's shorter than it was, considerably so, but seems to be holding the new length, so I just need to make them longer

 

[Doric]

I would be interested in a couple if you have in
Stock.

 

[spandit]

Have had to rebuild my printer but it's nearly up and running now

 

[spandit]

Been playing with Blender to render my designs in a photorealistic manner. This shows the new finned base that will retrofit onto a factory magazine:

Have also had some made from transparent resin but they're not tested yet.

 

[Mantve]

is it possible to buy them from you ? ?

 

[jb7x57]

Have you got any made for sale

 

[spandit]

is it possible to buy them from you ? ?

Not sure how I missed this. Yes, it is

Have you got any made for sale

Yes, I have, although I generally assemble them to order

 

[rapidboy]

Hi, i know this an old thread but are you still making these ?, im looking for a single shot adaptor for a Finnfire 1 Range and maybe a couple more for the Finnfire 2 Range.

 

[spandit]

Hi, i know this an old thread but are you still making these ?, im looking for a single shot adaptor for a Finnfire 1 Range and maybe a couple more for the Finnfire 2 Range.

Hi, sorry for the late reply. The issue with trying to make a single shot adaptor is that the feed ramp is part of the follower and therefore spring loaded. On some other rifles, the feed ramp is incorporated into the body of the magazine itself, so having a solid/fixed follower is no problem. On these there's little advantage that I can see for not just using an empty magazine as an adaptor because a fixed feed ramp would block the bolt travel.

That said, on the range models, the stock is larger so a normal 5 shot magazine is difficult to extract. I've made finned bases that provide a gripping point to make them easier to pull out. It's a similar design to the Weihrauch HW60J magazine base.

Is the Finnfire 2 the quad? I did make a one off prototype for this, can't remember whether for 17HMR or 22LR but again, I'm sure I could provide bases that would retrofit to these. I don't have any OEM magazine for the Quad in my possession nor a rifle to test them on, though