That drilling, at last in all its' accessorised splendour!

1967spud Reloading Supplies Ltd - UK Suppliers for Reloading Equipment supplies, We also stock Bullet Heads and Bullet Cases Guns Cabinets, Night vision and much much more...
Pine Marten

Pine Marten

Well-Known Member
Good morning!

This thread is shameless showing off, I admit it. Also advertising for some fantastic craftsman-and-womanship.

Here are some photos of my fully restored and pretty much as new J. P. Sauer drilling in 16 bore and 7x57R. The restoration (complete strip, clean, reassembly and adjustment to the head of the stock) was carried out by Erwin at Alan Rhone. The sling, in oak-tanned leather with a pigskin suede backing to prevent slipping from the shoulder, was made to measure by John Newton, contactable through JasonH on here, as was the cartridge wallet. Finally, the canvas and leather gunslip was made to measure by Jennifer Roy of The Springfield Saddler.

I am ridiculously proud of the overall result. Now I just need to use it!

Hope you enjoy the pictures.

IMAG0047~2.webpIMAG0049.webpIMAG0051.webpIMAG0052.webpIMAG0053.webp
 
PM

That's not a real pirate's gun - you should gift the Sauer to me and get yourself one of these instead:

Pirate%20Gun_zpse4735zuz.jpg


I have to say that the finished drilling really does look the business and will I am sure, serve you well, give you a great deal of pleasure and hopefully many happy hunting memories.

The restoration work also looks top-notch.

Any chance of some close up shots of the action?
 
willie_gunn said:
I have to say that the finished drilling really does look the business and will I am sure, serve you well, give you a great deal of pleasure and hopefully many happy hunting memories.

The restoration work also looks top-notch.

Any chance of some close up shots of the action?
Click to expand...

Oh I'm sure you can help me create some memories later this year... Regarding keeping the zero, that's not a problem, those claw-mounts are rock solid. However just now, I don't know where the zero is! I'm off the Bisley in three weeks to find out, and test my homeloads. Erwin did boresight and adjust the scope for me so I daresay it's not far off. It certainly grouped very well when I first tried it.

I'll see about some close up action shots later. It's just that right now I'm trying to type this whilst YPM tried to switch the PC off so I'm not going to muck around with guns....
 
Looks like a Nickel Marburg scope from the trademarks position, they are very high quality units.
Now a tip from me, after unloading the drilling move the safety into the fire position, then pull both triggers as you are closing the action to about the halfway position = 2 cocking pins will close, now slide the tang barrel selector to the rear and pull the rear trigger as you fully close the drilling then the 3rd cocking pin will close = now the drilling has all 3 hammer springs tensions released, this is for storage or transport in the assembled form.
I learnt this trick from a berufsjaeger pal of mine in Germany.
Weidmannsheil and have an enjoyable time using it.
Martin
 
Bavarianbrit said:
now the drilling has all 3 hammer springs tensions released, this is for storage or transport in the assembled form.
Martin
Click to expand...

I'm interested to know the thinking behind why some consider it necessary to release the springs? My shotguns are left in the cocked position without harm. Thinking about it, as one example, my Winchester 101, which I bought in 1984, has been left cocked for 30 years. It gets used on 4-5 days during the game season, fires about 100 rounds a year, and has never missed a beat.

Oh, and PM, that is some top quality kit you have there. Excuse me while I wipe my chin.

-JMS
 
Bavarianbrit said:
Looks like a Nickel Marburg scope from the trademarks position, they are very high quality units.
Now a tip from me, after unloading the drilling move the safety into the fire position, then pull both triggers as you are closing the action to about the halfway position = 2 cocking pins will close, now slide the tang barrel selector to the rear and pull the rear trigger as you fully close the drilling then the 3rd cocking pin will close = now the drilling has all 3 hammer springs tensions released, this is for storage or transport in the assembled form.
I learnt this trick from a berufsjaeger pal of mine in Germany.
Weidmannsheil and have an enjoyable time using it.
Martin
Click to expand...
It is indeed a Nickel Marburg 6x43 scope and in fine condition apart from some of the bluing being worn off. I'll try your technique although I just use snap caps at the moment.
 
TA6319 said:
very nice setup, I take it we will see it at the H4H shoot?
Click to expand...
I can bring it along to show off if you like, but it's not destined to be a range gun, I won't be shooting it. It'll only see Bisley for load development and zeroing. After that, it's a dedicated hunting gun!
 
And what other gun do you need for all your hunting needs - a roe buck in the morning, followed by some walked up snipe, followed by a spot of driven Phaesant, and then out of covers comes a charging wild boar so you back up the rifle with a couple of slugs, and at last light you drop a flying goose. And I suppose you can fit a hardy smuggler into the gun case as well!
 
Yes, all I need now are those sorts of opportunities! I don't have a Hardy smuggler but I do have a spinning rod that breaks down in the same way. To be honest I optimised my fishing kit as a teenager since space in the family car was at a premium for holidays. My siblings have fond memories of packing "Lawrence's bloody fishing kit".
 
Pine Marten said:
I can bring it along to show off if you like, but it's not destined to be a range gun, I won't be shooting it. It'll only see Bisley for load development and zeroing. After that, it's a dedicated hunting gun!
Click to expand...

Quite right too, PM.:-D


Excellent craftmanship, both original and recent.




Steve.
 
You must log in or register to reply here.
Shooting Supplies : Ammo - Reloading - Firearms - Optics - Accessories
Back
Top