Sold: Torque wrench

[NickJ]

Thanks

 

[lambic]

Not much help, but I got a Wera one (does the required 3nm for scopes and mounts) for £47 on the 'Bay

Far far better stuff than the gun specific makes.

 

[jcampbellsmith]

I got a torque wrench and bits that was made for bicycles off Amazon.
Regards
JCS

 

[Johnyt]

I have a Set of the Warne 65in-lb and 25-inlb
Also a Norbar Model 5, range of 10-50 in-lb Probably the best small torque wrench on the market.

 

[User00040]

Not much help, but I got a Wera one (does the required 3nm for scopes and mounts) for £47 on the 'Bay

Far far better stuff than the gun specific makes.

+1

Wera torque pistol is the best of the best

 

[Klenchblaize]

+1

Wera torque pistol is the best of the best

Good colour too.

K

 

[lambic]

I got the more feeble version...this one:

Wera 05074701001 7441 Kraftform Adjustable Torque Screwdriver 1.2-3Nm

March scopes say mounts and rings etc no tighter than 3Nm, so I suspect it is the perfect tool

Obviously use Wera or similar quality bits in it, not cheap crap

 

[finnbear270]

Wheeler F.A.T. Stixs ?

 

[bullet chucker]

Bike parts, IceToolz Ocarina Torque Wrench. on order, waiting delivery any day soon,will have to report back if it is up to the job, Rem 700 30.06 Picatinny rail 20MOA.

BC.

 

[scotch_egg]

Obviously use Wera or similar quality bits in it, not cheap crap

I can’t agree with this more. I made that mistake!!!

 

[lambic]

Yes, it is painful isn't it, especially for those flat head bits on Anschutz stocks

 

[Ronin]

Fix it sticks

 

[Ronin]

I can’t agree with this more. I made that mistake!!!

Up end it abd shoukd drop out with a “tap”

 

[scotch_egg]

Up end it abd shoukd drop out with a “tap”

It’s properly wedged and tiny for the location it’s in. It was a bit suppplied in my Borka torque wrench. I didn’t think it cheap at the time.

 

[User00040]

It’s properly wedged and tiny for the location it’s in. It was a bit suppplied in my Borka torque wrench. I didn’t think it cheap at the time.

Use a strong magnet

 

[scotch_egg]

Use a strong magnet

It also looks the wrong size in that photo. It was a snug fit in operation.

 

[Ronin]

Small pointed tool steel punch and tap in the reverse orientation it broke

That May relive the stiction

 

[NickJ]

Fix it sticks

Am just being a tight Scot sorry Andy to see if I can get used one first! If I have the right 'heads' do I just need the basic unit i.e.: Fix It Sticks - All-in-One Torque Driver (15-65 inch lbs) - FIS-VTD ? Thanks

 

[Ronin]

That’s the one - comes with small variety of bits and a natty pouch that you can put in a dry bag and carry with you

 

[NickJ]

That’s the one - comes with small variety of bits and a natty pouch that you can put in a dry bag and carry with you

Thanks, ordering one