I've had some brown Pueblo leather turn up which I plan to use for coasters.
These Tiger Stripe inlaid coasters are 2 pieces of 2mm Veg tanned leather laser cut/engraved, a 86mm diameter 1mm thick Aluminium disk is glued onto bottom piece, with the Desert tiger stripe being glued onto of that. Finally the top leather is glued down. Once dry it is saddled stitched by hand using a brown 1mm waxed 150d nylon thread. All edges are bevelled, sanded and burnished by hand including the cut out. Finally an acrylic resin is brushed on all sides/edges to add waterproofing.
I also have some green, black or tan pueblo that can be used as wellas rhodesian camo or green duck hunter camo (frogskin). I can also add personalisation if needed.
They measure around 10x10cm and approximately 4/5mm thick.
If interested drop me a message.
These are sold as a set of 2 for £25.00 inc pp. There is no charge for personalisation.
These Tiger Stripe inlaid coasters are 2 pieces of 2mm Veg tanned leather laser cut/engraved, a 86mm diameter 1mm thick Aluminium disk is glued onto bottom piece, with the Desert tiger stripe being glued onto of that. Finally the top leather is glued down. Once dry it is saddled stitched by hand using a brown 1mm waxed 150d nylon thread. All edges are bevelled, sanded and burnished by hand including the cut out. Finally an acrylic resin is brushed on all sides/edges to add waterproofing.
I also have some green, black or tan pueblo that can be used as wellas rhodesian camo or green duck hunter camo (frogskin). I can also add personalisation if needed.
They measure around 10x10cm and approximately 4/5mm thick.
If interested drop me a message.
These are sold as a set of 2 for £25.00 inc pp. There is no charge for personalisation.
