In both 30.06 and 6.5x55mm I am looking to find a domestic supplier of projectiles to hedge against availability/cost of imports. The early 6.5x55mm tests have gone well.
Today I did a cheeky three-shot "ladder" to establish very crude parameters for my 30.06 evaluation of 150gr Virtus Ospreys. Criteria: POI same as current Barnes load?, felt recoil, appearance of spent cartridge. [Not scientific, not definitive, but a very economical way to start finding a good load that could be interchangeable with other ammo in the cupboard out to 150m]
Based on the Vihtavuori data for the N540 powder I use in 30.06, the charge range is 48 to 53 gr for sample 150gr bullets. [no exact match for Virtus projectile, Some 150gr projectiles charge values are even higher]

Next looked to see what GRT modelling thought the pressures would be for charge values between 48.5 and 51gr. [caveat: GRT does not list Virtus projectiles either, so I looked at several different permutations. All suggested large safety margin]

Based on that I loaded three cartridges [all 2.25" COAL] at 49gr , 49.5gr and 50gr N540. I then fired all three at a target set at 100m, and included a tried-and-proven Barnes 180gr by way of control.

One swallow does not a summer make...but the 49gr load is closest to the rifle's existing POA/POI, felt really comfortable, case extracted easily and looked fine.
The 49.5gr and 50gr cartridges had a little resistance on bolt lift, but cases all fine and not "extractor signed". So I could probably run a little hotter than 49gr if that does not deliver the goods.
On my return home I have prepped another 4 of the 49gr offerings and will next shoot for a group. If good, I will chrono for drop data, but that is very much secondary to reliable POI. Happy days...

Today I did a cheeky three-shot "ladder" to establish very crude parameters for my 30.06 evaluation of 150gr Virtus Ospreys. Criteria: POI same as current Barnes load?, felt recoil, appearance of spent cartridge. [Not scientific, not definitive, but a very economical way to start finding a good load that could be interchangeable with other ammo in the cupboard out to 150m]
Based on the Vihtavuori data for the N540 powder I use in 30.06, the charge range is 48 to 53 gr for sample 150gr bullets. [no exact match for Virtus projectile, Some 150gr projectiles charge values are even higher]

Next looked to see what GRT modelling thought the pressures would be for charge values between 48.5 and 51gr. [caveat: GRT does not list Virtus projectiles either, so I looked at several different permutations. All suggested large safety margin]

Based on that I loaded three cartridges [all 2.25" COAL] at 49gr , 49.5gr and 50gr N540. I then fired all three at a target set at 100m, and included a tried-and-proven Barnes 180gr by way of control.

One swallow does not a summer make...but the 49gr load is closest to the rifle's existing POA/POI, felt really comfortable, case extracted easily and looked fine.
The 49.5gr and 50gr cartridges had a little resistance on bolt lift, but cases all fine and not "extractor signed". So I could probably run a little hotter than 49gr if that does not deliver the goods.
On my return home I have prepped another 4 of the 49gr offerings and will next shoot for a group. If good, I will chrono for drop data, but that is very much secondary to reliable POI. Happy days...









