Yew Tree 6mm Bullet

[wiltshire boy]

Hello All
If you would like any more info on my bullets please feel free to email me on info@yewtreefieldsports.co.uk

I don't do Facebook I'm afraid, not a brilliant way to advertise his products is it?

I'm afraid I don't have endless funds to advertise and was hoping that word would get round in due course which it seems to have done. Development costs for the bullets themselves are pretty substantial in my terms and so I've had to use media that is free. I haven't sat and 'pimped my wares' on here for example as I don't pay for advertising so felt it was not right to do so.

so many questions so few answers ! was the target 25/50/75/100 on and on, what was the powder used, primer. if you want to get us interested please post all the information. this should include the product suppliers details the availability of the projectiles/bullets are other calibers ready to go or is this just a trial run with the 6mm bullets. photos of new unloaded bullets so we can see what they compare to .any load data worked up and verified.

feel free to email me on the above address and I'll answer any queries you have. In terms of the questions you raise here, The 6mm are developed and in stock, the first production run was 20,000.
the 6.5mm and .30 cal are in development and I would hope to have them fully tested within 3 weeks. Provided all goes well I should be able to do a production run fairly quickly after that.

Because I am interested and can't find any prices, or much description/info on the website.

Please feel free to email any questions you have. In terms of pricing the 6mm bullets are £45 for 50 +£4 delivery, £90 for 100 incl delivery and £200 for 250 incl; delivery. The website is rather out of date I'm afraid but it does have the email address on it and there is plenty of info on the facebook page for those that use that.
All the best
Richard Sharman

 

[Triggermortis]

£45 for 50 as I said, all the info I have is here:-

https://m.facebook.com/yewtreefieldsports?__tn__=C-R

 

[Jelen]

Hello All
If you would like any more info on my bullets please feel free to email me on info@yewtreefieldsports.co.uk

I'm afraid I don't have endless funds to advertise and was hoping that word would get round in due course which it seems to have done. Development costs for the bullets themselves are pretty substantial in my terms and so I've had to use media that is free. I haven't sat and 'pimped my wares' on here for example as I don't pay for advertising so felt it was not right to do so.

feel free to email me on the above address and I'll answer any queries you have. In terms of the questions you raise here, The 6mm are developed and in stock, the first production run was 20,000.
the 6.5mm and .30 cal are in development and I would hope to have them fully tested within 3 weeks. Provided all goes well I should be able to do a production run fairly quickly after that.

Please feel free to email any questions you have. In terms of pricing the 6mm bullets are £45 for 50 +£4 delivery, £90 for 100 incl delivery and £200 for 250 incl; delivery. The website is rather out of date I'm afraid but it does have the email address on it and there is plenty of info on the facebook page for those that use that.
All the best
Richard Sharman

Thanks for your post. I understand your reasoning and it answers the questions I had. I'll be in touch once the 6.5's are up and running.

 

[Ronin]

Could you advise what weights you are offering in 6.5 and 7mm

Would it be possible to advise if these have drive bands to obturate and what the recommended twist rate to stabilise are for them

Also do you have predicted or actual BC of your products

Cheers

 

[wiltshire boy]

Could you advise what weights you are offering in 6.5 and 7mm

Would it be possible to advise if these have drive bands to obturate and what the recommended twist rate to stabilise are for them

Also do you have predicted or actual BC of your products

Cheers

The 6.5 will be 115 grain, haven’t designed a 7mm as yet. I won’t have bc’s until they’re tested.
Cheers
Rich

 

[flytie]

I’ve had some fantastic results with this British Made 6mm Non Toxic Bullet made by Yew Tree Fieldsports (Wiltshire). Very impressed. Bullet is being pushed at around 3100fps. It weighs 80.5gr and is inherently accurate.

I would highly recommend anyone try these bullets in 6mm/.243 if you’re looking for a Non Toxic alternative.

Attached are photos of rounds pushed at 44.8gr and 45.0gr.

Ben,

I take it you are using a drop tube to get all that N-160 into the case? Or are you just compressing it?

Simon

 

[Ronin]

Thabks - are you using drive bands ?

Trade membership is a tenner a month by the way - well spent

 

[bendavies7]

Ben,

I take it you are using a drop tube to get all that N-160 into the case? Or are you just compressing it?

Simon

Hi Simon,

Neither to be honest.

 

[Totsy]

Ben,

I take it you are using a drop tube to get all that N-160 into the case? Or are you just compressing it?

Simon

It’s not a compressed charge.

 

[flytie]

Hi Simon,

Neither to be honest.

I asked as I ran an equivalent bullet through quickload and the results were interesting to say the least. Are you using a shallow seating depth for the bullet then?

Simon

 

[bendavies7]

I asked as I ran an equivalent bullet through quickload and the results were interesting to say the least. Are you using a shallow seating depth for the bullet then?

Simon

It measures 2.056 to the o-give. So not really shallow no.

Ben

 

[20-250]

Would be interested to hear real world reports of how they expand.

 

[flytie]

Would be interested to hear real world reports of how they expand.

I agree, some photographs of entry, exit holes and wound channels would be interesting.

S.

 

[bendavies7]

Would be interested to hear real world reports of how they expand.

I agree, some photographs of entry, exit holes and wound channels would be interesting.

S.

Hopefully will get something this weekend. I’ll send in some images then.

 

[wiltshire boy]

hopefully this works. This was the last roe follower I shot a couple of weeks back. 200 yards broadside. Photos inside and out once skinned and the animal after shooting.

 

[ashray]

good evening,they look like very high velocity hits.they must be 3000fps at the muzzle to cause that sort of damage at 200 yards

 

[wiltshire boy]

good evening,they look like very high velocity hits.they must be 3000fps at the muzzle to cause that sort of damage at 200 yards

I think they would have had terminal velocity at that range of 2,400 fps from a MV of 3100fps. For the majority of 6mm cartridges that mv is not really flat out. In terms of damage there is very little in any worthwhile edible meat but the bullets are frangible in the front end as previously mentioned.

Thabks - are you using drive bands ?

Trade membership is a tenner a month by the way - well spent

Picture of bullet is on first page of this post. I would call them more machined recesses rather than drive bands as such but the basic principle is the same.

 

[wiltshire boy]

Ben,

I take it you are using a drop tube to get all that N-160 into the case? Or are you just compressing it?

Simon

Viht quote max charge for a .243 win and 85 grain barnes tsx as 46 grains of N160 in .243 so Ben's load with a similar but lighter bullet seems perfectly sensible.

 

[wiltshire boy]

Some photos of ballistic gel tests and bullet fragments recovered for those that are interested. The smaller fragments were recovered in the water bag closest to the gel and fragments of increasing size recovered in bags 2 and 3. The bullet shank (50 grains) penetrated through the gel and 70cm of water.