Cz 455 17hmr

[Jaseo69]

hi please can anybody give me advice i have a 17hmr and ita shooting about 6-10 inches high ive run out of elevation down and cannot get it zeroed 100 yards my scope has 50 MOA and I have a 20MOA rail do I need more MOA rings thansk

 

[User00044]

Is it possible for the rail to be reversed or fit a flat rail ?

 

[DVS1]

You could get some scope mounts that have adjustability in them also.

I'm surprised you've run out of elevation adjustment and still 6-10" high! Something could be out of whack! Does the rifle group well?

 

[Jaseo69]

You could get some scope mounts that have adjustability in them also.

I'm surprised you've run out of elevation adjustment and still 6-10" high! Something could be out of whack! Does the rifle group well?

Yes rifle groups well nail size at 100 yards with steady wind it might be the scope to be honest only has small amount of MOA

 

[DVS1]

If you have another s ope to try or can borrow one then give that a whirl first mate

 

[Smellydog]

Huh, you have a 20moa rail and are surprised it's shooting to high.

Just get a normal rail or go straight onto the dovetails.

 

[C&K Suffolk]

See if you can switch the rail around or get a flat rail mate

 

[Ratsbadboy]

hi please can anybody give me advice i have a 17hmr and ita shooting about 6-10 inches high ive run out of elevation down and cannot get it zeroed 100 yards my scope has 50 MOA and I have a 20MOA rail do I need more MOA rings thansk

As said above , ditch the MOA rails. My CZ455 HMR is fitted with a 4-16x50 Hawke Sidewinder scope via bog standard Hawke High Dovetail mounts. Zeroed perfectly at 100yard with very little elevation adjustment.

 

[DVS1]

I have a 20moa rail on my cz455 and no elevation issues

 

[Jaseo69]

I have a 20moa rail on my cz455 and no elevation issues

It's got to be the scope

 

[Smellydog]

We never had these inclined mounts back in the day but now they are everywhere.

Intended for long range shooting and not really needed on air guns or rimfires or normal use rifles and I often wonder how many are fitted the wrong way around!

 

[DVS1]

Check and test each component separately to rule out the issue...scope first is my shout

 

[Andydorset]

id remove the rail then try,