7mm prc mod A-tec H2

[PEA]

I've been granted a 7mm prc slot and wanted some advice on a mod that won,t break the budget. The mod i was looking at is the A-tec h2 as this is not too expensive and light weight for the stalking rifle its going on. ( Bergara Quest Carbon).

Anyone else use this mod on a magnum caliber?

 

[Ronin]

I’d check with manufacturer spec on suitability on a magnum calibre

 

[scotch_egg]

I’m going to get sh@ on for suggesting this but I would be looking at Freyr and Devik UTS.

 

[C h r i s]

DPT with stainless 1st baffle

 

[takbok]

I use a lighter A-Tec cmm-4 on my 270 (60+ gr powder) and a H2 on my short barreled 220 Swift. I'd happily use the H2 on a 7mm PRC (70+ gr powder?) - it might be worth adding a 3rd baffle if it's not quiet enough with 2.

 

[Blackhawk]

I’ve got the Bergara Quest Carbon in 7mm PRC and I’ve tried both Ase Utra SL7i and a Stalon XE 108. Both performed well think I’ll stick to the Stalin to keep the weight down when stalking. If doing range work I’ll put the SL7i on.

 

[Onelesscharlie]

Hi
We have been looking at building mods for 6&7mm PRC calibres in the last couple of days, strangely enough 5/8 x 24 unef.
Available as an option if required.

Colin

 

[Radstorm]

I was looking at an A-tec but have ordered a
Hausken as it’s numbers appear to give better sound reduction - equally I’ve had a JetZ for nearly 20 years and its awesome.

Hausken Lyddemper - A Beretta Holding Company

www.hausken-silencers.com

 

[20ppc]

I've been granted a 7mm prc slot and wanted some advice on a mod that won,t break the budget. The mod i was looking at is the A-tec h2 as this is not too expensive and light weight for the stalking rifle its going on. ( Bergara Quest Carbon).

Anyone else use this mod on a magnum caliber?

Keep away from A-Tec H2. I had one on a .223 and it failed after about 6 months. If you want a lightweight mod I would recommend the new Freyr and Devik UTS range. They have a titanium 3D printed core and are excellent.

 

[NBCCS]

I was looking at an A-tec but have ordered a
Hausken as it’s numbers appear to give better sound reduction - equally I’ve had a JetZ for nearly 20 years and its awesome.

Hausken Lyddemper - A Beretta Holding Company

www.hausken-silencers.com

Where did you order the hausken from as no UK suppliers currently

 

[K.H - Tikka]

Where did you order the hausken from as no UK suppliers currently

You could try here:

Hausken Rifle Moderators .17 up to .50

Hausken Rifle Moderators

southpointfirearms.co.uk

K.H

 

[NBCCS]

You could try here:

Hausken Rifle Moderators .17 up to .50

Hausken Rifle Moderators

southpointfirearms.co.uk

K.H

Was a wd60 mk2 whisper I was after for 7prc. Gmk wouldn't confirm when placing an order with hausken. Settled on a stalon xe149 in the end

 

[Cumbrian 1]

Was a wd60 mk2 whisper I was after for 7prc. Gmk wouldn't confirm when placing an order with hausken. Settled on a stalon xe149 in the end

You should be busy getting that high seat up!

 

[Radstorm]

Where did you order the hausken from as no UK suppliers currently

Hi
So I’ve given details of the Mod I wanted to Shooting Supplies in Bromsgrove - at present I had a brief conversation and getting one ordered appeared it wasn't a problem - just sorting out the variation etc