Finally back out

It's been a long time coming, but with long hours over the winter period meaning I couldn't get out in legal light, and the then the birth of the puppies and subsequent dealing with them amd general business that made in the household has meant getting out had to be put on the back burner, that is until tonight.

Made a plan to head down the farm for an evening, wind was up but overall looked like it should be fairly pleasant. As soon as I parked up, spotted a roebuck and the top of the field on the boundary but with no safe angle to get to him for a shot he was left. Off we trotted and all was still nothing moving except for the hares, I can only assume the roe didn't fancy sitting out in the wind and had bedded down in more covered areas. Decided to work back towards the truck with the plan to then do a final lap, and before we knew it, I spotted a roebuck chilling out away from the wind next to the hedge row that ran up the field. To far away for a shot and posing a precarious angle if I got close from where I was, I decided to back track and head into the next field before working up the tramline so I could come from the other side. As I turned the corner I didn't realise quite how close he was so quickly got on the sticks before he got up and started to move. Managed to stop him with a shout before getting a hear lung shot off. Down he went. He then jumped up and started to move off, thinking I'd fumbled the shot I lined up as my friend said I think you hit him in the leg. I was sure I didn't but got on him again and in the scope saw him spin and the classic fountain of blood come out the side. I knew he was going down and it was a death run (albeit very slow and not far) down he went again and then no movement. Sent Major out and he had a great time following the blood trail before grabbing him.

A fantastic re-entry into something I've sorely missed and yes i had a rnager flex hoodie and my tiger stripe balaclava onIMG-20250419-WA0039.jpgIMG-20250419-WA0040.jpg20250419_201113.jpg20250419_201117.jpg20250419_175706.jpg
 
Last edited:
Ahh! Looks like it's been drilled internally for the bar. Which must do something for the insulation... but maybe small enough on the while not to matter. I've been planning to make something rest the ends on the shelf ledges. But yours looks much stronger than that.
 
Ahh! Looks like it's been drilled internally for the bar. Which must do something for the insulation... but maybe small enough on the while not to matter. I've been planning to make something rest the ends on the shelf ledges. But yours looks much stronger than that.
I can't try take some photos of it up close tomorrow if that would help?
 
I got my bar from bushwear (though can’t see it sold anymore). Wish I had just bought the stuff from b&q!

To be very honest, it is a length of I think 25mm hollow metal bar with some end caps. Simply drill 2 holes near the top of the fridge, cut the bar to the size of the fridge and fit the end caps. Job done.

There have been some reviews on here if you look for ‘Tenderum’ I think it was called. There were some other bits for vents but I haven’t put that in and a roe will keep in there for 2 weeks. The rail is strong enough for three roe and that is all I can fit in there with a push.

Just be careful that there are no internals like chilling pipework etc in the walls before you drill through. All mine had was insulation.
 
Weighed (skin on, hooves and head off, with guts out), skinned and first stage of cutting up done before the Mrs has to head out for a bit and I'll be on dad duty. Saved what I could from the shoulders and done the neck.

He was heavier than I thought he'd be and had a decent little layer of fat inside

20250421_091048.webp
 
Wow - all the way through! Thanks for the picture. I guess I just have to try and make sure there's no piping there and then just pile in with the drill. I might use a bit of builders foam around the ends too. Thanks again @T.eddie
 
Back
Top