For Sale: 30mm Optilok rings and bases for Sako 85

[NickJ]

Two sets of 30mm Optilok rings and bases to fit Sako 85 medium action. One in black, height is Extra Low, other one cerakoted dark grey I think it's Medium height. Both in very good condition and come with plastic ring liners.

£80 each or £150 for both

 

[NickJ]

Both still available

 

[NickJ]

Open to offers as neither fit my new rifles or rail on the other

 

[ciscokid]

Hi Nick,
I have sent you a PM.

 

[NickJ]

Hi Nick,
I have sent you a PM.

Black Extra Low sold to @ciscokid pending payment

 

[NickJ]

Grey standard height set still available £70

 

[Scoggsy1978]

Are the grey still available?
Do you know if these would fit my Sako 75 Finnlight with a 56mm objective scope?
Thank you

 

[Donkey Basher]

Are the grey still available?
Do you know if these would fit my Sako 75 Finnlight with a 56mm objective scope?
Thank you

The 30mm medium height rings work perfectly with my 56mm objective Zeiss on a Tikka M595 so can't see there being a problem with your set up.

 

[Scoggsy1978]

The 30mm medium height rings work perfectly with my 56mm objective Zeiss on a Tikka M595 so can't see there being a problem with your set up.

OK thanks. I am not sure what size rings I have on my rifle atm but annoyingly the scope just touches the thicket part of the barrel between the chamber and the start of the fluted part of the barrel. Is there much clearance in your set up?

 

[Donkey Basher]

This is what you need to enable you to work out what you need.

https://www.dauntseyguns.co.uk/downloads/OptilockTechnicalSpecifications.pdf

 

[Scoggsy1978]

This is what you need to enable you to work out what you need.

https://www.dauntseyguns.co.uk/downloads/OptilockTechnicalSpecifications.pdf

Thank you.....I may be reading it wrong but it looks like all 30mm tube options for my Sako would accommodate a 56mm scope

 

[Donkey Basher]

Nope - you're reading it wrong!

The measurements in the chart are the outside diameter of the scope not the diameter of the lens that's in it - your 56mm is the diameter of the glass. Get a ruler and measure across the end of the scope.

Or get a ruler & measure the height as shown on the base/ring of what you've got & then get the next size ring up from that.

 

[sako]

hi what you want is a med rings for a 56mm scope l have a sako rifle with 2.5 10x56 on a 85 Finnlight . thanks

 

[Scoggsy1978]

Ok great sounds like the rings/bases @NickJ has may work well.....hopefully they are still available

 

[NickJ]

Ok great sounds like the rings/bases @NickJ has may work well.....hopefully they are still available

Sorry, only have the bases left if that is any help? They were under a 56mm scope