For Sale: 5th leg kits for quad sticks (£15 + P&P)

[grandad of the woods]

Well done m8

 

[Kernow_Stalker]

This week's orders dispatched today

 

[Kernow_Stalker]

I am in the rare position of having several of these made up and ready for immediate dispatch!

Cheers

 

[PeterR]

Hi Luke,

As per DM, I would like one of these.

Peter.

 

[PeterR]

Hi KS,
Arrived safely today.
Should get it fitted for the weekend.
Many thanks.
Peter

 

[Kernow_Stalker]

Perfect, hope it does you well!
All the best

Luke

 

[jb7x57]

Any luck with the Blaser sticks ?

 

[Kernow_Stalker]

Any luck with the Blaser sticks ?

I've prototyped several designs, what I am struggling with is retention of the clip to a satisfactory standard. And if I were to attach the adaptor to a leg for the blaser then it would likely be too large to allow the sticks to close fully

 

[PeterR]

I got round to fitting this the other day.
The head of the Fiery Deer sticks screws together so is easy to disassemble. I drilled a 4mm hole and mounted the adapter with washers internally.
Someone I know has some 15.8mm and 19mm dia aluminium which will slide one inside the other so I'm going to try to make a telescopic leg that will fit in the bag with the sticks.

 

[Essexsussex]

Sorry if I missed it…but does it work with b&q stick version.

 

[Kernow_Stalker]

Hi,

Its a b&q stick that its designed to accomodate as the 5th leg, however as it stands it isn't compatible with a set of quads made with b&q sticks. I'll have to have a think and see if I can figure a design out for them

 

[Essexsussex]

Hi,

Its a b&q stick that its designed to accomodate as the 5th leg, however as it stands it isn't compatible with a set of quads made with b&q sticks. I'll have to have a think and see if I can figure a design out for them

Thanks Kernow. Can’t help picturing you stalking in a black and yellow rugby shirt (was London Cornish colours if I remember right!)

 

[Kernow_Stalker]

Thanks Kernow. Can’t help picturing you stalking in a black and yellow rugby shirt (was London Cornish colours if I remember right!)

It works. The deer just think you're a giant bumble bee with a rifle

 

[BenBhoy]

Could I get one for bushwear quad please @Kernow_Stalker

 

[Kernow_Stalker]

Could I get one for bushwear quad please @Kernow_Stalker

I've PMd you

 

[beef1986]

Could I take one of these please? For the bushwear sticks
Thanks

 

[Kernow_Stalker]

Good afternoon all,

Having sold circa 50 of these adaptors over the last year, unfortunately, I received a message detailing a failure. This is the first failure I am aware of, and I believe it is down to a printer setting since getting a new printer in November.

That being said, I am not a businessman and just a shooter looking to help other shooters so am mortified. I have re-designed the main body and tested and glad to say I've tested it to destruction, and the body stands up to a lump hammer, resulting in a 3-inch woodscrew bending and ripping out of a 6x6 post before the adaptor fails.

All future orders will be with this new stronger version.
And if any previous orders would like a new body sent free of charge, please DM me. (When you DM, please include brand of sticks and postal address)

All the best

KS

 

[Tony Morgan]

Good afternoon all,

Having sold circa 50 of these adaptors over the last year, unfortunately, I received a message detailing a failure. This is the first failure I am aware of, and I believe it is down to a printer setting since getting a new printer in November.

That being said, I am not a businessman and just a shooter looking to help other shooters so am mortified. I have re-designed the main body and tested and glad to say I've tested it to destruction, and the body stands up to a lump hammer, resulting in a 3-inch woodscrew bending and ripping out of a 6x6 post before the adaptor fails.

All future orders will be with this new stronger version.
And if any previous orders would like a new body sent free of charge, please DM me. (When you DM, please include brand of sticks and postal address)

All the best

KS

Well you can't say fairer than that, good for you! I am perfectly happy with my Bushwear sticks version.

 

[Kernow_Stalker]

Bump. These are still available to print on request

 

[Fishpond]

Sorry if I missed it…but does it work with b&q stick version.

Hopefully it will as have ordered one for mine but you need to make the "crutch" version of the b&q sticks with some U section aluminium on the front - search the "monkey sticks" thread for "crutch"

Dry powder

Richard