6.5PRC primers

Scuffy

Well-Known Member
I am about to start loading for a new 6.5PRC.
For those that load for this caliber, are you using large rifle, or large magnum rifle primers ?

Thanks

Scuffy
 
I have shot both and have seen no visible difference in CCI250 (Magnum) over BR2's. RS76 used here - other powders may be available
I'm using CCI#250's too in my PRC. I was planning on just using the standard #200's but remembered that they have quite a soft casing to them.

I use RS70 in mine
 
I’m just starting out with 6.5 PRC but will be running RS62 and federal 215 magnums , regarding primers - they all go bang but performance is what gives you the best results ES / SD over a chronograph, Hornady load data is done with Federal 210, Vihtavouri load data is done with 215 magnums so both will be fine, the problem is finding any !!
 
Magnum, was getting around 150ft/s less with N165 when I tried standard LR primers. SD also dropped considerably when using magnum primers.
 
I use Fed 215 mag and cci250 mag and iam about to try magtec ! not seen any change in the first two as not used the magtec .
 
Back
Top