anyone use a 6.5x57r

[WAYNE DAVIES]

Hi All
I've just purchased a Blaser K95 in 6.5x57r just wondering if any one has any experience of the cal and if anyone knows where I can get some dies from ????

Thanks

Wayne

 

[Paul 600]

There is the problem! The internal diameter is almost identical to the 55 but brass or rounds are hard to get hold of!

 

[derek treherne]

HI wayne the 6.5x57r is a rimmed version of the 6.5x57. it is used in doulble barreled rifles and combination guns. so maximum loads are slighty lower than ones used with its rimless counterpart. atb derek

 

[derek treherne]

wayne from a ballistic viewpoint the 6.5x57r will provide a slight margin over the 6.5x55 while generally their ballistic performance is equal

 

[WAYNE DAVIES]

There is the problem! The internal diameter is almost identical to the 55 but brass or rounds are hard to get hold of!

It comes with 400 rounds of factory ammo so brass shouldn't be a problem but I'm not sure where to get some dies from???

 

[WAYNE DAVIES]

wayne from a ballistic viewpoint the 6.5x57r will provide a slight margin over the 6.5x55 while generally their ballistic performance is equal

Hi Ern
I missed your call I was in the shower, thanks for your help.
It seems accurate enough, a friend test fired it to save me travelling to try it and shot a 1/2 group off the bench, the factory ammo it comes with is 129grn rws so should be fine for every thing I want to shoot with it but I'll ahve to have a play with my beloved 100 grn b/tips if I can find some dies I'll have a ring around when I finally get my hands on it which might be a while I have to wait for West mercia to do the variation

 

[straightbetweentheeyes]

should get your hands on it in about nine months then i want a 30-06 but not sure if i van be bothered with the hassle dealing with them!! had m level 1 nearly a year and still havent told them to take my mentoring condition off
regards, Jez.

 

[ezzy6.5]

Hi Ern
I missed your call I was in the shower, thanks for your help.
It seems accurate enough, a friend test fired it to save me travelling to try it and shot a 1/2 group off the bench, the factory ammo it comes with is 129grn rws so should be fine for every thing I want to shoot with it but I'll ahve to have a play with my beloved 100 grn b/tips if I can find some dies I'll have a ring around when I finally get my hands on it which might be a while I have to wait for West mercia to do the variation

Hi Wayne, You bought it then! I think you will find that 6.5x57 dies will be the same as the 6.5x57r so that should make it easier to find a set (obviously different shell holder)

Ezzy

 

[ezzy6.5]

Didn't mean to do that with a quote. Doh...

Ezzy

 

[derek treherne]

HI jez. i here it can be up to 12 months atb derek

 

[straightbetweentheeyes]

derek that would not suprise me at all, i swear they do it just to put people off applying and having firearms.. drives me nuts i tell ya!!!
regards, Jez.

 

[Claret_Dabbler]

That was the k95 in Steve Beattie's?

You utter barsteward. I wanted that.

Nice one.

 

[JMS906]

6.5x57R dies

Hi All
I've just purchased a Blaser K95 in 6.5x57r just wondering if any one has any experience of the cal and if anyone knows where I can get some dies from ????

Tasty rifle. Very.

It looks as though you can use regular 6.5x57 dies for the 6.5x57R. Go to rcbs.com and search under item 32801

 

[WAYNE DAVIES]

That was the k95 in Steve Beattie's?

You utter barsteward. I wanted that.

Nice one.

Hi Brian
I'm afraid so it was love at first sight been looking for a second hand one in a sweet cal for a long time finaly found one when I'm the most skint I've been for years never mind your only here once.

Atb

Wayne

 

[WAYNE DAVIES]

Tasty rifle. Very.

It looks as though you can use regular 6.5x57 dies for the 6.5x57R. Go to rcbs.com and search under item 32801

Thanks for that JMS906 I'll have a look

Wayne

 

[chrisc]

midway uk but they are around £100 hope this helps.

chris

 

[8x57]

As others have already said and from the information I have you can use standard 6.5x57 dies but with a different shell holder. A similar situation exists with 8x57jrs , I use the standard dies but with a different shell holder.

RCBS, Lyman and Redding all list dies for 6.5x57 but some of them are not listed as standard so there may be a premium to pay.

The shellholder that you will need is - Lyman 14B, RCBS 26 , Hornady 13 or Lee 14.

 

[chopper]

Small world! Was my good friends gun.

 

[jay 22]

give reloading solutions a ring also wayne.

 

[WAYNE DAVIES]

Cheer chaps for all your help.

Wayne