FoxAndDeer
Well-Known Member
That's a different set-up! Whats the pistol? Never seen one of those over here in blighty
Bunny basher set ups
- Thread starter Bridon0320
- Start date
Only the Ruger gets used for bunnies as the pistol is conditioned only for Target Shooting. Its a Grand Power K22 Long-Barrelled Pistol (LBP) - a .22LR semi-auto - the moderator is a barrel sleeve. Good Fun on steel plate and accurate out to 60m on a good day
Good old stainless 10/22 on a Hogue stock, cheap Tasco 3-9 x 40 scope and a red lamp on top. It'll nut bunnies as far out as I'm happy to take them on. If it ain't broke, why fix it ?
Do the pard 007 work well with the zeiss conquest v4 scopePard retailer ........at your service
If you go the nv route. Get one with range finder. The put the Yukon XT on my .22 Brno mod 2 and merrily used a whole mag on a rabbit I thought was 50-60yrds away turned lamp on and it was 100yrds+ Then hopped off....it now sits on the 17hmr for that reason point and shoot.
Edit to say I love my .22 and it always will have a place in the cabinet. Now wears an old nikon 6x42 with a eBay £11 led red lamp on top.
Edit to say I love my .22 and it always will have a place in the cabinet. Now wears an old nikon 6x42 with a eBay £11 led red lamp on top.
Last edited:
RichardAllen
Well-Known Member
Another vote for .17hmr, in my case Anschutz, and a Pulsar F455 add on for NV.
Foxyboy43
Well-Known Member
Great footage thanks. Very impressive clarity - I have been looking at the Pard and Wraith recently but undecided - did you add an ir and what sort of distance was the footage taken at plz? I would be using it primarily for fox out to 150 yds.
regards.
Pellet Pinger
Well-Known Member
Great footage thanks. Very impressive clarity - I have been looking at the Pard and Wraith recently but undecided - did you add an ir and what sort of distance was the footage taken at plz? I would be using it primarily for fox out to 150 yds.
regards.
To give you an idea the furthest rabbit at 1:47 was 110yds with just the inbuilt IR, if you add one of the popular lasers the 008 will be good for double that, and some.
hi going to be putting my Weirauch HW66 thumbhole in the classifieds any day its mint fitted with A pard 008 a-tec wave mod and Britannia picatinny rail fantastic on bunnies will pull my finger ouy take some pics and advertise
b.b
b.b
They tend to work better with cheaper lower end scopes, such at Hawke, plus side parallax adjustment essential.
When I tried to fit a Pard on to my CZ 452 straight onto the 11mm dovetails it placed the scope off centre with the barrel, but it looks like this is how you have done it. Is this not a problem ?? Any advice would be great
Dovetail to Picatinny rail works wonders from Ant Supplies .
Shimming the Pard is common place.
No mine is on a dovetail to Picatinny rail from Ant Supplies.
Amazing piece of kit the Pard when you have set it up and dialled in your preferences in the menu’s.
iain b
Well-Known Member
It will need shimming and a screw fitting on the rail for elevation. A coke can works well. I’ve tried a modified adjustable mount but gave up with it. I ran a tap through hole before the rearmost bolt fixing.
wabbit warren
Well-Known Member
Hawke sidewinder scope and pard007 but sit it on a .17hmr please
so easy to shoot and so flat point and shoot 60-160 yds
so easy to shoot and so flat point and shoot 60-160 yds
Similar threads
