Small but perfectly formed 
I'm upgrading my chiller due to shooting more reds and needing extra space. I've had up to three lowland reds in here regularly and biggest stag I've had in was 145kg. Space for plenty of roe / fallow. The stag in the image below is 110kg and you can see that you could comfortably get a couple that size in there.
Internal dimensions are 1.2m deep x 1m wide x 2m high. Panels are 85mm thick. I only have it sat on a pallet as the floor isn't flat in the barn and is stone with no dampproof membrane so I didn't want it to sweat under the chiller. It has a couple of rails fitted with 4 sliding rings (I'm sure you could get more rings if you wanted - they are this style with the hooks cut off Butchers Meat Hanging Rail Sliding System for Meat Rooms and Trucks Van 2 Mt | eBay)
Monobloc was checked over and gas quantities confirmed by Keith / Sikadog last year. It drops to temperature very quickly and holds temperature well (see image from bluetooth temp logger). I've owned it from new and a couple of marks here and a few scratches above the door from gambrels where I load it off my hoist but all superficial. Otherwise in good condition. I've always just collected the condensate in a bucket but could easily be piped away to a drain if you had one near by. Runs off normal 13 amp supply so ready to plug in and go. Wired for internal light but I never bothered connecting it. Can be seen running for the next week or two then after that I'll dismantle it to make room for the new one.
I'm based on the edge of the Peak District, between Chesterfield and Sheffield. c.£3-3.5k to buy new now so £1,200 please.
I'm upgrading my chiller due to shooting more reds and needing extra space. I've had up to three lowland reds in here regularly and biggest stag I've had in was 145kg. Space for plenty of roe / fallow. The stag in the image below is 110kg and you can see that you could comfortably get a couple that size in there.Internal dimensions are 1.2m deep x 1m wide x 2m high. Panels are 85mm thick. I only have it sat on a pallet as the floor isn't flat in the barn and is stone with no dampproof membrane so I didn't want it to sweat under the chiller. It has a couple of rails fitted with 4 sliding rings (I'm sure you could get more rings if you wanted - they are this style with the hooks cut off Butchers Meat Hanging Rail Sliding System for Meat Rooms and Trucks Van 2 Mt | eBay)
Monobloc was checked over and gas quantities confirmed by Keith / Sikadog last year. It drops to temperature very quickly and holds temperature well (see image from bluetooth temp logger). I've owned it from new and a couple of marks here and a few scratches above the door from gambrels where I load it off my hoist but all superficial. Otherwise in good condition. I've always just collected the condensate in a bucket but could easily be piped away to a drain if you had one near by. Runs off normal 13 amp supply so ready to plug in and go. Wired for internal light but I never bothered connecting it. Can be seen running for the next week or two then after that I'll dismantle it to make room for the new one.
I'm based on the edge of the Peak District, between Chesterfield and Sheffield. c.£3-3.5k to buy new now so £1,200 please.
