CZ527 aftermarrket stocks / boyds

[sauer]

Right folks

Got a .22 hornet I love in cz527 bit it's not
" right " in the factory stock it sits when torqued in stock correctly away over to one side but when centered it's hardly / barely hunter tight in stock.... and it throws every other round and I know it's not me

I could put it to a smith get bedded bit that be minimum £500
..
What aftermarket stocks are available?
Anyone got a Boyds from US lately?
Any hassle?

Don't know of any chassis available for them

Paul

 

[Reloader708]

Im in the very same position, cz 527in hornet.
I think im going to go form.
British company, plenty of options and they look good.

 

[JockStalk]

MDT do a chassis specifically for 527 223, don’t know if that’s a fit for hornet though Paul

MDT LSS-XL Gen 2 Chassis System

The original LSS-XL Gen2 chassis system was designed as a variant of our highly popular LSS chassis. The LSS chassis was designed for use with compact, short barrelled rifles. Many customers liked the LSS chassis, but wanted to use a fixed buttstock, and get their bipod out further forward...

www.riflemanfirearms.com

 

[zerovarm]

Right folks

Got a .22 hornet I love in cz527 bit it's not
" right " in the factory stock it sits when torqued in stock correctly away over to one side but when centered it's hardly / barely hunter tight in stock.... and it throws every other round and I know it's not me

I could put it to a smith get bedded bit that be minimum £500
..
What aftermarket stocks are available?
Anyone got a Boyds from US lately?
Any hassle?

Don't know of any chassis available for them

Paul

Ordered 3 stocks from Boyds recently and delighted with them. Around 14 days from ordering to delivery.

 

[sauer]

Ordered 3 stocks from Boyds recently and delighted with them. Around 14 days from ordering to delivery.

How did you go with vat import duties etc please ?

Paul

 

[Pellet Pinger]

The two i ordered from Boyds were spot on but i still glass bedded them myself, easy enough to do if you’re handy.

 

[zerovarm]

How did you go with vat import duties etc please ?

Paul

You pay UPS this end prior to the goods being delivered to your door. All pretty simple. I belive it was around 15% of total

 

[zerovarm]

The two i ordered from Boyds were spot on but i still glass bedded them myself, easy enough to do if you’re handy.

Yip only down side. Didn't bed my own but fitted pillars

 

[Essexsussex]

Really like my GRS not sure what it would cost for that rifle

 

[sauer]

Well the Boyds are out of consideration

Email back saying 527 requiring a mag inlet are not available


Paul

 

[Kalahari]

My Boyds stock for my 527 in 223 was a drop in. Is the spacing for a Hornet different?

David.

 

[suburban bushwacker]

Ive made a list of the options for stocks and other upgrades on my blog

 

[sauer]

My Boyds stock for my 527 in 223 was a drop in. Is the spacing for a Hornet different?

David.

No idea you tell me

All I know is I got this from Boyds
Hello,
CZ Varmint and American 527 interchange. Be sure to confirm the dimensions with the Tech Specs provided for you at the bottom of the stock page, a blue paragraph.

Note: CZ 527 requiring a mag inlet, are NOT available.

Thank you,

Boyds

 

[25 Sharps]

My Boyds stock for my 527 in 223 was a drop in. Is the spacing for a Hornet different?

David.

Yes, the hornet and the .222 are slightly different to the .223.

 

[Kalahari]

Yes, the hornet and the .222 are slightly different to the .223.

Thanks for clearing that up. Perhaps not enough Hornet 527s in the USA for Boyds to make a run.

David.

 

[sauer]

Well 527 varmint and 527 American are on their drop down list..

Then get email saying mag inlet option unavailable

I thought all 527 were mag inletted..

 

[lincolnjefferies]

Yes, the hornet and the .222 are slightly different to the .223.

Have you personally tried this ? Just wondering as the .22 Hornet will fit into a .223 Kevlar Varmint stock fine.

 

[lincolnjefferies]

The Cz factory .17 Hornet thumb hole laminate stock is a great replacement for the standard .22 Hornet stock.

 

[25 Sharps]

Have you personally tried this ? Just wondering as the .22 Hornet will fit into a .223 Kevlar Varmint stock fine.

Yes, I have and the bottom metal is different in terms of the mag inlet. It was a few years back now but from memory the footprint of the floor plate is also slightly smaller, not sure on the screw spacing.

 

[Bowland blades]

Right folks

Got a .22 hornet I love in cz527 bit it's not
" right " in the factory stock it sits when torqued in stock correctly away over to one side but when centered it's hardly / barely hunter tight in stock.... and it throws every other round and I know it's not me

I could put it to a smith get bedded bit that be minimum £500
..
What aftermarket stocks are available?
Anyone got a Boyds from US lately?
Any hassle?

Don't know of any chassis available for them

Paul

It should not cost £500 to bed this rifle , Its like 5 hours tops . Is the stock really badly warped or split ? I don't think it took me any longer than that will the pillars made t bedded and cleaned up . Ideally a pro rifle smith would prefer to have a number of rifles to bed at once and time for full hardening but you can't charge for having something on the bench curing .