I bought a couple of 4 inch plate targets from Temu, I built a hanging solution from angle iron with some chain hanging the targets off.
A couple of issues:
I attached the chain to plate with bolts initially but they sheared off with the power of a shot.
I replaced them with carabiners but these have also bent with the force of shot. I will try some shackles.
Second issue, checked zero with 7x57 on plate today and it flipped the targets over so that the chain is shorter.
Distance 100 yards, backstop mountain side.
Is the issue just the range, do I need to push out to 200? Thought it’d be handy to have at 100 so I can drive up and take a shot to check zero without having to walk out and distance targets.
On the positive side, the plate is taking hits from 223 and 7mm pretty well with just surface pitting.
A couple of issues:
I attached the chain to plate with bolts initially but they sheared off with the power of a shot.
I replaced them with carabiners but these have also bent with the force of shot. I will try some shackles.
Second issue, checked zero with 7x57 on plate today and it flipped the targets over so that the chain is shorter.
Distance 100 yards, backstop mountain side.
Is the issue just the range, do I need to push out to 200? Thought it’d be handy to have at 100 so I can drive up and take a shot to check zero without having to walk out and distance targets.
On the positive side, the plate is taking hits from 223 and 7mm pretty well with just surface pitting.




