Morning All,
As above I have been having a few issues. The quad is a 2009 Honda TRX 420 CC manual transmission. I've owned it since new, its been serviced regularly, kept under cover and its been pretty reliable. The only major cost has been new tyres and the rear diff and axle which I replaced myself last year.
So last week it wouldn't start with just a clicking noise. It pull starts fine first time. I tested the battery with my multimeter - 11.6v. I charged the battery overnight and it got to 12.6v and it then starts fine.
I left it (and used it a bit) to get rid of any surface charge. Now when the engine is off the battery shows 12.5v. If I push the starter, the voltage dips to about 10.4 but then only return to around 12.4v (or lower if I rev the engine). My understanding is that the alternator should supply about 1v when the quad is running. To me those voltage scores are a bit low but not terrible?
Switching the multimeter and black cable over to DC 10 Amps, I can't find any parasitic draw. No extra lights or winches have been added to the electrical system anyway.
I havn't worked out if the battery is tired, there is an issue with the alternator or charging system or there is something else going on - I know there are various black electrical boxes - voltage regulators or charging regulators etc.
Any advice appreciated?
Thanks,
As above I have been having a few issues. The quad is a 2009 Honda TRX 420 CC manual transmission. I've owned it since new, its been serviced regularly, kept under cover and its been pretty reliable. The only major cost has been new tyres and the rear diff and axle which I replaced myself last year.
So last week it wouldn't start with just a clicking noise. It pull starts fine first time. I tested the battery with my multimeter - 11.6v. I charged the battery overnight and it got to 12.6v and it then starts fine.
I left it (and used it a bit) to get rid of any surface charge. Now when the engine is off the battery shows 12.5v. If I push the starter, the voltage dips to about 10.4 but then only return to around 12.4v (or lower if I rev the engine). My understanding is that the alternator should supply about 1v when the quad is running. To me those voltage scores are a bit low but not terrible?
Switching the multimeter and black cable over to DC 10 Amps, I can't find any parasitic draw. No extra lights or winches have been added to the electrical system anyway.
I havn't worked out if the battery is tired, there is an issue with the alternator or charging system or there is something else going on - I know there are various black electrical boxes - voltage regulators or charging regulators etc.
Any advice appreciated?
Thanks,
Last edited: