M14x1 to 5/8x24 Muzzle Adapter

[Andilicious]

Hi
Is there anyone in the UK making the above?
Tried searching for a solution to allow me to be able to change my Bergara thread over to the larger one to open up more options for a Muzzle Brake
Cheers
Andy

 

[Greenmist]

There was a post on this recently, I'm sure someone mentioned them being made, is having the barrel rethreaded not an option?

 

[wytonpjs]

M14 to M18:

Dauntsey Guns: Thread Adapters, RCCTNM14, RCC - Muzzle Thread Adapter, Converts M14 Muzzle Thead to M18 Moderator

Wiltshire based gun and shooting equipment shop serving the Chippenham, Swindon, Bath and Bristol area, RCC - Muzzle Thread Adapter, Converts M14 Muzzle Thead to M18 Moderator, Thread Adapters, RCCTNM14, RCC - Muzzle Thread Adapter, Converts M14 Muzzle Thead to M18 Moderator -

www.dauntseyguns.co.uk

 

[wytonpjs]

M14 to 5/8x24:

M14X1L TO 5/8-24 ADAPTER | eBay UK

This quality precision machined thread adapter allows you to use any device threaded 5/8-24 to fit M14x1LH threads. This adapter is threaded M14X1LH on in the inside (female threads) and has 5/8-24 threads on the outside (male).

www.ebay.co.uk

 

[Andilicious]

There was a post on this recently, I'm sure someone mentioned them being made, is having the barrel rethreaded not an option?

No mate. It needs to get thicker to suit!

 

[Andilicious]

M14 to M18:

Dauntsey Guns: Thread Adapters, RCCTNM14, RCC - Muzzle Thread Adapter, Converts M14 Muzzle Thead to M18 Moderator

Wiltshire based gun and shooting equipment shop serving the Chippenham, Swindon, Bath and Bristol area, RCC - Muzzle Thread Adapter, Converts M14 Muzzle Thead to M18 Moderator, Thread Adapters, RCCTNM14, RCC - Muzzle Thread Adapter, Converts M14 Muzzle Thead to M18 Moderator -

www.dauntseyguns.co.uk

Close. But not 5/8 X 24!

 

[Andilicious]

M14 to 5/8x24:

M14X1L TO 5/8-24 ADAPTER | eBay UK

This quality precision machined thread adapter allows you to use any device threaded 5/8-24 to fit M14x1LH threads. This adapter is threaded M14X1LH on in the inside (female threads) and has 5/8-24 threads on the outside (male).

www.ebay.co.uk

In the US unfortunately.

 

[Len the dog]

M14 to 5/8x24:

M14X1L TO 5/8-24 ADAPTER | eBay UK

This quality precision machined thread adapter allows you to use any device threaded 5/8-24 to fit M14x1LH threads. This adapter is threaded M14X1LH on in the inside (female threads) and has 5/8-24 threads on the outside (male).

www.ebay.co.uk

There seem to be a few of these on the internet but all LH thread. I've been looking for a 1/2"x20 female to 14x1 male but without success.

 

[Len the dog]

If it weren't for the fact that my lathe is in about 300 pieces (refurbishment project) then I'd knock a few up. Hopefully this autumn I'll have time to complete it.

 

[Len the dog]

Hi
Is there anyone in the UK making the above?
Tried searching for a solution to allow me to be able to change my Bergara thread over to the larger one to open up more options for a Muzzle Brake
Cheers
Andy

Silencer adapter M14x1 to 5/8x24 TPI

I've looked at this and they have the adapter that I need but out of stock, I've registered to be informed when they are back in. They do however show the adapter that you are after as in stock.

 

[Dunwaters]

I think Sako are supplying them with rifles destined for the US market.

 

[palo]

Silencer adapter M14x1 to 5/8x24 TPI

I've looked at this and they have the adapter that I need but out of stock, I've registered to be informed when they are back in. They do however show the adapter that you are after as in stock.

This one works well . I got one for my mate for his mod. They also make a few muzzle brakes in m14x1 if you wanted one .

 

[NullMac]

Local machine shop?

 

[Andilicious]

Local machine shop?

I think that’s the way I will go.

 

[Andilicious]

This one works well . I got one for my mate for his mod. They also make a few muzzle brakes in m14x1 if you wanted one .

This is in US again. How long did it take to arrive and did you get spanked at customs?

 

[palo]

Not US. They are in France

 

[Andilicious]

Not US. They are in France

The prices all come up in $

 

[Len the dog]

The prices all come up in $

I suspect either a mistake on the website or the English language page is aimed at the US market. Select the French language page and the price is shown in euros.

 

[Len the dog]

Ant supplies do one.

M14x1 to 5/8″x24 TPI Rifle Barrel Threaded Adapters - M14x1CW or M14x1CCW

 

[tackb]

i'd just get a muzzle break in the correct thread it will be better than adding additional threads and potential alignment issues