New Toy

Patrick A

Well-Known Member
After a bit of deliberation I have bought a .275 Rigby and having had the slot for a while thought that this would fill the gap nicely.

It need a little work and a new scope and with that probably rings but I am told the following:

J. RIGBY & CO.
A .275 RIGBY BOLT-MAGAZINE SPORTING RIFLE, serial no. 6480,
21in. unsighted nitro barrel engraved in gothic script 'J. RIGBY & CO LONDON.', the receiver (with thumb cutout) mounted with a Zeiss Diatal-ZA 4x32 T* telescopic sight, serial no. 1836060, the receiver ring engraved 'CALIBRE .275 RIGBY HI-VELOCITY' and 'MADE IN ENGLAND', the sidewall engraved 'DEUTSCHE WAFFEN - UND MUNITIONSFABRIKEN OBERNDORF A.N.', hinged floorplate engraved with the calibre designation and with push button release, pistolgrip stock with cheekpiece, monte carlo comb, pistolgrip-cap, sling swivels, 14 3/8in. pull including 3/4in. rubber recoil pad, weight 8lb. 12oz.

Provenance: The makers have kindly supplied us with the following information:

s/n: 6480
Mauser Sporting Best
Sold to: Michael Stone
February 1985
.275
21” barrel
No open sights
Zeiss 4 x scope

If I feel flush and the cost isn't too great I may have it restocked as I prefer a round pistol grip but that can wait as the current one is quite long which I like.
 

Attachments

  • 144070_VIEW 02.webp
    144070_VIEW 02.webp
    47.3 KB · Views: 267
  • 144070_VIEW 03.webp
    144070_VIEW 03.webp
    74.6 KB · Views: 263
  • 144070_VIEW 04.webp
    144070_VIEW 04.webp
    116.1 KB · Views: 258
  • 144070_VIEW 05.webp
    144070_VIEW 05.webp
    77.7 KB · Views: 270
  • 144070_VIEW.webp
    144070_VIEW.webp
    165.7 KB · Views: 256
Very nice and very similar to my Wharton version Personally I would keep the original stock - looks well grained and well looked after To get one made as good as that will probably cost you more than the rifle did!

S
 
Very nice!
Out of curiosity, what is the purpose of what looks like two grooves in the woodwork running down at an angle, one at each end of the loading / ejection port?
 
Looks like the stock is relieved there to ease loading?

A very nice itch to scratch and a beautiful rifle :tiphat:
 
Patrick Congratulations!.



An absolutely distinguished classic set!



What a great job!



Best regards.



Manuel.
 
Very nice!
Out of curiosity, what is the purpose of what looks like two grooves in the woodwork running down at an angle, one at each end of the loading / ejection port?

I confess to having no idea! I am taking it to a gun maker this weekend so will ask..
 
  • Like
Reactions: VSS
Very nice, I too have a Rigby in 275. It was a mess when I got it but Paul Roberts and his wonderful gunsmith restored it.
I have been trying to find a load that it likes but have now given up as it loves PPU 165 grn ammo.
Tusker
 

Attachments

  • IMG_1645 (2).webp
    IMG_1645 (2).webp
    235.4 KB · Views: 121
Very nice!
Out of curiosity, what is the purpose of what looks like two grooves in the woodwork running down at an angle, one at each end of the loading / ejection port?

It looks like rather than 2 grooves there's a cut-away section of which the 2 'grooves' are the outer edge, presumably to facilitate easier & more downwards ejection. It would also help with loading by feel when your eyes had to be elsewhere.
 
Very nice, I too have a Rigby in 275. It was a mess when I got it but Paul Roberts and his wonderful gunsmith restored it.
I have been trying to find a load that it likes but have now given up as it loves PPU 165 grn ammo.
Tusker
Ha, you’ve got Patrick A’s pistol grip on your rifle!
Ken.
 
Back
Top