Primers - Does Performance Vary Between Brands ?

its interesting how different people fair with different makes i used rws for years but about 9 years ago i changed to remington i have stuck with them if i cant get them i will use federal
 
Just a quick question, I usually purchase CCI or Federal primers, which appear to be be out of stock virtually everywhere. Are Magtech, Remington or say Sellior and Bellot equivalent quality and consistency for hunting purposes ? Hearing mixed reviews on this forum about Magtech, what about the other brands ? Many Thanks
Yes. I found that CCI Large Rifle gave less extreme spread than did Remington 9 1/2 in my two .270 Winchester calibre rifles.
 
Just a quick question, I usually purchase CCI or Federal primers, which appear to be be out of stock virtually everywhere. Are Magtech, Remington or say Sellior and Bellot equivalent quality and consistency for hunting purposes ? Hearing mixed reviews on this forum about Magtech, what about the other brands ? Many Thanks
S&B are very good, the batch of magtech LR I have are hard, had failures to fire in various rifles.
 
I've sworn by S&B SR Mag primers for 6.5CM loads for five years or so.

I've recently started loading for 300PRC and so S&B LR Magnums were my go-to . . . very disappointing with failure to ignite the charge on most occasions (Vit N170) and hang-fires with Vit N568. The loads ignite fine with Magtech LR primers.

Triffid
 
Here's my notes made in likely 2008. Rifle was likely a 23.5" barrel BRNO ZKK 600.

Hodgdon H4831 - 55 grains - .270 WCF - 150 grain Hornady Soft Point.
CCI Standard Large Rifle primer five rounds average velocity 2809fps with 30 fps E/S.
Remington 9 1/2 Large Rifle primer five rounds average velocity 2803 fps with E/S 116fps.
 
I've sworn by S&B SR Mag primers for 6.5CM loads for five years or so.

I've recently started loading for 300PRC and so S&B LR Magnums were my go-to . . . very disappointing with failure to ignite the charge on most occasions (Vit N170) and hang-fires with Vit N568. The loads ignite fine with Magtech LR primers.

Triffid
I’ve used the LR magtech sun 300 PRC for a few rounds, no issues in that rifle to date.
 
I’ve used the LR magtech sun 300 PRC for a few rounds, no issues in that rifle to date.
The Magtech LR primers certainly work much better than the S&B LR Magnums in my 300PRC loads, but I'm getting an ES of about 40fps. I'm hoping that a hotter 'Magnum' primer will help get this down, if I can find any.
Triffid
 
Speak to your RFDs The only tiny get out is Edgars who have police / Military but that doesn't mean they will distribute all that comes in to private citizens and things will change for worse or hopefully better .
What I refer to is the nonsense notion that the USA designated the UK as a terrorist state. I have no idea about primer sales and distribution in the UK, I cant find enough primers in my state now. I am sure that the demand for small arms ammo has been part of the shortages war time has always caused that.
 
Big shortages globally, was over in Namibia last week and they had some Russian brand in stock, said were crap though, but if that’s all you can get…..
 
Vihtavuori were building a new factory to make primers, it was meant to open sometime in 2025, anyone have any updates on this,
 
Back
Top