Smellydog
Well-Known Member
I lost all three screws to the star shaped keeper plate on the bottom of the unit.
They are not m3 but I had three screws, m3.
So I tapped the original holes out to me.
However the plate won't allow them to go in straight so I had the snug the plate down with one screw and tap them again so the tap cut some of the plate. Screws went in fine then.
Anyway, go check yours!
They are not m3 but I had three screws, m3.
So I tapped the original holes out to me.
However the plate won't allow them to go in straight so I had the snug the plate down with one screw and tap them again so the tap cut some of the plate. Screws went in fine then.
Anyway, go check yours!
