Are there any Gunsmiths out there able to machine a barrel with the Svemco Quick-Mount interrupted thread and shoulder arrangement, thus negating the use of the adaptor as per below?
Thanks
K
Thanks
K
Svemko Quick-Mount Machining
- Thread starter Klenchblaize
- Start date
HonestJohn
Well-Known Member
You would limit yourself to svemko’s system unless shortening the barrel for future systems. A bit like making a hole in a rifle stock for a Spartan adaptor
Freeforester
Well-Known Member
You’ll be passing yourself of as the Prince’s dad ere long, your Majesty ‘the’ K
Have you contacted Callum Ferguson at PRS? I’m sure there may be others who are wizards with a CNC mill too.
You've got to love the concept and aesthetic of withdrawing one's suppressor from a leather holster, prior to briefly attaching to a single shot rifle with a deft flick of the wrist.You’ll be passing yourself of as the Prince’s dad ere long, your Majesty ‘the’ K
Have you contacted Callum Ferguson at PRS? I’m sure there may be others who are wizards with a CNC mill too.
Not forgetting the custom leather bino strap that might double as an improvised roe drag rope.
K
K,
Looking at that and, coincidentally, the A-tec equivelant in the post by @BE Precision, I reckon you could actually have the best of both worlds if you were to have the muzzle threaded as normal with a proper shoulder but then have the thread machined away over two opposite sides.
That way, you could get a moderator thread machined to make it a quick attach whilst at the same time have the option of using a normal, fully threaded, moderator if required or if ever sold.
Just thinking
Looking at that and, coincidentally, the A-tec equivelant in the post by @BE Precision, I reckon you could actually have the best of both worlds if you were to have the muzzle threaded as normal with a proper shoulder but then have the thread machined away over two opposite sides.
That way, you could get a moderator thread machined to make it a quick attach whilst at the same time have the option of using a normal, fully threaded, moderator if required or if ever sold.
Just thinking
Freeforester
Well-Known Member
Have one’s faithful ghillie ( colloq.— an outdoor valet in the highlands) perform both perchance, thus avoiding risk of unnecessary wrist- or other bodily injuries… his custom leather-lined wheelbarrow serves as both silent shooting brake (permitting the incumbent, be he tyro or season’d Nimrod to make full use of his reticle-etched Zeiss hand optics, and maintain full conetrol of the unsheathed muzzle of his lincoln-lacquered piece, or ice-fishing paraphernalia, etc) and recover of the slain wisp-o’-the-woods or leviathan of the Stygian deep thereafter, thus permitting the by-now triumphant sportsman to indulge in a little impromptu field photography perhaps, or chat with the ladies who may have been following proceedings intently from a discrete distant behind, or to catch up with one’s latest podcast-de-l’heure, via one’s calfskin- or shagreen-clad portable micro-communicator of choice, with a freshly made coffee of choice drawn from the same holster, now pressed into service as faithful retainer of his Swaine Adeney Racing Green Thermos?
It’s a tough one, I know…
Whatever, whither, when and from whence a Man may draw his ‘Svenko suppressor’ is his business, and his alone…
‘Maxim’ be damned!
Last edited:
cant imagine anyone doing that level of machining anywhere near the £75 price for an adaptor
Similar threads
