Swarovski Z6i zero shift

[ruger77]

Any one had a problem with the Z6i gen 2 ,I had an ongoing problem with shot placement I’ve now figured out I’ve got a zero shift on the scope . I checked the zero today as I missed the target on the other evening while zeroing I was on full mag 15 times three rounds in a thumb nail at 100 yards happy with that went out tonight dropped the mag down to 6x missed again the target was broad side 90 yards normally would not have an issue with this thankfully it was a clean miss

 

[Dave_45]

Usual suspects like mounts and mod all ok ?

 

[Camdig]

Go back to target and try it at various mags and ranges to get a true understanding if mag is shifting zero.

 

[HonestJohn]

As said, check your screws, rings, bases etc first! Then when all tight and no question your real estate is solid, Test on paper a few times and document with pictures, then send it to swaro for servicing and request it’s done gratis - although recently they’ve been seen starting to move from free repairs to paid repairs - a dangerous shift IMHO as it’s their one USP they have left over the big competitors.

 

[Selous]

Any one had a problem with the Z6i gen 2 ,I had an ongoing problem with shot placement I’ve now figured out I’ve got a zero shift on the scope . I checked the zero today as I missed the target on the other evening while zeroing I was on full mag 15 times three rounds in a thumb nail at 100 yards happy with that went out tonight dropped the mag down to 6x missed again the target was broad side 90 yards normally would not have an issue with this thankfully it was a clean miss

You need to test more thoroughly on paper not on deer. As others have said you need to check with and without moderator, check stock is tight and that mounts and bases are as well. Shoot groups at different magnifications as well. In reality it is more likely to be a rifle or mount problem than the scope but anything is possible.