Which cheek piece/comb raiser

[NickJ]

What do you guys recommend please for a cheek piece that:

- Will raise the comb more than the current one I have that is only around 1/4" lift (my home made inserts seem to flatten or move, I liked the look of the AIM ones but the sharpshooter video says it only raises it around 1/4"

- Has some bullet loops in (I generally put 2 or 3 in when culling hinds on the hill)

- Isn't so wide that it will still work with a Vorn rucksack on the hill that I use when

Thanks

 

[09mutley05]

How high do you need I have a toubon one that’s quite high I’m not using, I’ll check when I get home and see how high it is

 

[monarman]

Hunters of England..... have them on all my rifles (4 of them soon to be five), bullet loops... and can if need be have some cardboard or similar put under the raiser peice to give a bit more height if needed and it stays put!.

Hope the smock is working for you bud !!

 

[NickJ]

How high do you need I have a toubon one that’s quite high I’m not using, I’ll check when I get home and see how high it is

I think around 3/4" - thanks

 

[NickJ]

Hunters of England..... have them on all my rifles (4 of them soon to be five), bullet loops... and can if need be have some cardboard or similar put under the raiser peice to give a bit more height if needed and it stays put!.

Hope the smock is working for you bud !!

Thanks, will take a look.

SwedTeam Titan smock had just one outing so far and really impressed with breath-ability, I tend to just wear cotton DPM smock when it's dry so it will come out a lot more now this wet weather has arrived, thanks for the advice on it.

 

[Buchan]

I have a hunter you can try if you like

 

[BLUEROLL]

What do you guys recommend please for a cheek piece that:

- Will raise the comb more than the current one I have that is only around 1/4" lift (my home made inserts seem to flatten or move, I liked the look of the AIM ones but the sharpshooter video says it only raises it around 1/4"

- Has some bullet loops in (I generally put 2 or 3 in when culling hinds on the hill)

- Isn't so wide that it will still work with a Vorn rucksack on the hill that I use when

Thanks

Try the Tourbon velcro ones.

 

[09mutley05]

The one I have, is about 30mm

 

[nun_hunter]

How high do you need I have a toubon one that’s quite high I’m not using, I’ll check when I get home and see how high it is

I have a Tourbon one too. It came with 3 foam inserts to adjust the height and has elastic bullet loops. Well made, grips the stock nicely and was under £30

 

[Robs]

I've bought several cheap ones off ebay and customised them to my own needs. Fiddly velcro etc but were around £6 at the time and very good value. Mine came with removal cartridge wallet and loops. You can raise or lower the cheek piece as required. Cheap enough to lop and chop to requirements. .

 

[Rem783]

I bought a kalex Tecniks comb raiser easy to fit, comes with a template to show holes you need to drill, obvious synthetic stock

 

[Steve29]

https://customcheekrisersuk.co.uk/

Very sturdy and can set at whatever height you need.