X5i elevation inquiry help please

[jimmy milnes]

OK so I've got the scope sat back on the rifle and zeroed it up last night all OK..

But when dialing elevation "moa scope" you get to 12 moa then there's 1/2 moa to get to zero point then you start the second rotation, hope that explains it clearly enough..

So if I need 14 moa my heads telling me 2 moa on the second revolution, however what about the 1/2 moa between 12 an 0 ? Do I just forget about it ?
Cheers Jimmy

 

[jcampbellsmith]

If you forget about it, you will be 0.5 MOA out.
12.5 + 1.5 = 14
Regards
JCS

 

[jimmy milnes]

If you forget about it, you will be 0.5 MOA out.
12.5 + 1.5 = 14
Regards
JCS

Yeah so a bit of a design fault then maybe?

 

[Coddy]

Could it be a 25 MOA Turret, so split into the 2 rotations gives the 12.5.
But, i get your thinking, better being a 24 or 26 MOA to give a full number at the end of the 1st rotation instead of a half number.

 

[jcampbellsmith]

Yeah so a bit of a design fault then maybe?

I doubt it, I suspect this scope shares features from earlier scopes.
Regards
JCS