Heavy duty gambrel recommendations

[Luk3W3av3r]

Evening all,

Looking for recommendations on a heavy duty gambrels

Cheers

 

[TomDeer]

The Bushwear one in the link below has taken everything I've thrown at it. Bigger and better are almost certainly available!

Stainless Steel Gambrel

10mm Stainless Steel Gambrel 35cm between hanging points.

global.bushwear.co.uk

 

[Friendly Boar]

Donington deer management ones are great

 

[@theroedeerguy]

The Bushwear one in the link below has taken everything I've thrown at it. Bigger and better are almost certainly available!

Stainless Steel Gambrel

10mm Stainless Steel Gambrel 35cm between hanging points.

global.bushwear.co.uk

Another vote for the Bushwear gambrel I have found them to be brilliant.

 

[Tim.243]

Evening all,

Looking for recommendations on a heavy duty gambrels

Cheers

A length of 10mm stainless and get someone to warm up the bar and pull it around to the shape you want.

 

[J@son]

I use a folding one from DDM. I'm guessing you are after something a bit bigger but it's a great bit of kit and will last a lifetime.

 

[VSS]

Bushwear.
There are some other good ones out there, but a lot of them are too narrow I found. The ones from Bushwear are just about right.

 

[willie_gunn]

Dave Stretton, Donington Deer Management.

LARDER & BUTCHERY EQUIPMENT

LARDER & BUTCHERY EQUIPMENT Our standard stock production any other sizes or design can be made to order - minimum quantities can apply STAINLESS STEEL GAMBRELS 13" x 8mm Muntjac CWD & Roe £8.00 each plus carriage 15" x 10mm Roe, Fallow small Red £10.00 each plus carriage 19"

www.doningtondeermanagement.co.uk

 

[FISH BOY]

Evening all,

Looking for recommendations on a heavy duty gambrels

Cheers

Home

B&D STALKING STALKING EQUIPMENT If you have a stirring passion for hunting and stalking, then you need look no further than the family-owned and run, B & D Stalking Equipment, for all your equipment needs. Based in Great Wyrley, on the

bdstalking.co.uk

Hoop gambrel from B&D Stalking. Nice size - recon you could hang a buffalo off it too.

 

[redlab]

Dave Stratton, Donington Deer Management.

LARDER & BUTCHERY EQUIPMENT

LARDER & BUTCHERY EQUIPMENT Our standard stock production any other sizes or design can be made to order - minimum quantities can apply STAINLESS STEEL GAMBRELS 13" x 8mm Muntjac CWD & Roe £8.00 each plus carriage 15" x 10mm Roe, Fallow small Red £10.00 each plus carriage 19"

www.doningtondeermanagement.co.uk

Won’t get better than these for the money

 

[Tim.243]

Centre to centre is 300 on the width 250 high out of 12mm
you can use that as a guide and bend a piece of wire to what shape you like
But the replies will be awash of adverts lol
Nice to make your own...

@Luk3W3av3r
@FISH BOY

 

[dalem]

Keith watson

 

[jcampbellsmith]

jaspergilbert

Regards
JCS

 

[Tim.243]

jaspergilbert

Regards
JCS

Does no one make their own stuff any more!!

 

[Cheviot]

Evening all,

Looking for recommendations on a heavy duty gambrels

Cheers

a few on here Larder Equipment

 

[Stalker-of-the-deer]

Bushwear ones are good, hung a massive fallow buck of mine and it stood up fine!

Think I got it on sale for about 10 quid!

 

[Freeforester]

jaspergilbert

Regards
JCS

This ^^^. If you’re looking for heavy duty, it may be because you have or anticipate having heavy animals to larder; those gambrels on the market with a rounded loop atop are much, much easier to hoist deer on and off a rail system without the hoist hook getting snagged against the rail hook:



The lower one in the pic below are inconvenient by comparison:

 

[75]

This ^^^. If you’re looking for heavy duty, it may be because you have or anticipate having heavy animals to larder; those gambrels on the market with a rounded loop atop are much, much easier to hoist deer on and off a rail system without the hoist hook getting snagged against the rail hook:

If you look on the Donninton Deer Mgt page linked higher up the page you will see the best of both worlds!! Kinked and a hoop welded on top. Makes it very easy to transfer from hoist to chiller hook etc without hooks crossing over or getting caught.

@Tim.243 - I'm not sure many folk have the ability to source small quantities / cut / heat / bend 12mm stainless bar. Yep, it's a doddle if you have the facilities (or know someone who has) but for most folk it's easier just to pay seven quid a pop and have a ready made product delivered

 

[jcampbellsmith]

Does no one make their own stuff any more!!

Tim
Jasper Gilbert made some bars to my specifications. A good bunch to deal with who actually manufacture.
Best regards
JCS

 

[Tim.243]

If you look on the Donninton Deer Mgt page linked higher up the page you will see the best of both worlds!! Kinked and a hoop welded on top. Makes it very easy to transfer from hoist to chiller hook etc without hooks crossing over or getting caught.

@Tim.243 - I'm not sure many folk have the ability to source small quantities / cut / heat / bend 12mm stainless bar. Yep, it's a doddle if you have the facilities (or know someone who has) but for most folk it's easier just to pay seven quid a pop and have a ready made product delivered

Fine, but the OP asked for a heavy duty gambrel option, It is not my fault the will or want has gone out of most things these days....A bit of 10mm stainless as I first posted will go around cold or hot
I am sure you posted your rail height solution back some time ago? 4x2 on the diagonal? You can't get that in the post...

Their are plenty who make B&Q quad sticks for 12 quid instead of 120 which both can snap.