Help required
- Thread starter Elio
- Start date
Elio
Well-Known Member
Going at 2825fps
Smellydog
Well-Known Member
What calibre is it?
Smellydog
Well-Known Member
A bullet...It’s a little ELD-X
The Primer problems are real at present , but to get that bad a batch ? I doubt it ! I think the bolt needs a full strip down clean and service by a competent person first. Different / older stock quality primers could be usefull 50% no bang still says gun fault to me tbf
Jim Hutton
Well-Known Member
Certainly looks like over pressure to me too.
Smellydog
Well-Known Member
I stand by what I said.
It needs more fuel.
Are you getting a clean burn.
Even asking Google it notes many recommend going over book for a clean burn.
It's quite possibly a symptom of slow pressure build up not detectable by the human..
The case and primer rock back against the bolt together instead of just the primer. Then when peak does come the primer has nowhere to flow around the pin so gets stamped.
Add a gn and report back. Nothing bad will happen.
Bloody sissy's.
It needs more fuel.
Are you getting a clean burn.
Even asking Google it notes many recommend going over book for a clean burn.
It's quite possibly a symptom of slow pressure build up not detectable by the human..
The case and primer rock back against the bolt together instead of just the primer. Then when peak does come the primer has nowhere to flow around the pin so gets stamped.
Add a gn and report back. Nothing bad will happen.
Bloody sissy's.
Elio
Well-Known Member
Elio
Well-Known Member
6.5x47
Elio
Well-Known Member
38.2gr but still room for more
Smellydog
Well-Known Member
Is it burning clean?
Elio
Well-Known Member
Have shot the identical load for at least 5 years without any problems
Elio
Well-Known Member
Yes
Similar threads
