For Sale: “Ugly Annealer” Gas Annealer

[Kyle_hill98]

308

Typo that's what I meant

 

[Derraco]

.243 in .398 holder?

Yep! Well, 308…..

 

[Rusty Gate]

Typo that's what I meant

Sausage fingers

 

[Kyle_hill98]

Sausage fingers

How did you know

 

[Bavarianbrit]

I bought mine a different method from the Bulgarian chap as this one was not on offer at the time cost me 325€. How this one can be made in Oz (correct) and shipped across the world then sold for only £200 is amazing.

 

[flatliner]

The inserts are “family” based eg the 308 insert suits a 6.5 Creedmoor or 6mmBR. I personally use the 300WM insert for my 6.5PRC, in addition to the 223, 6BR and 6.5 Creedmoor.

The clearance on each insert is listed on them themselves:
223 = 10.2mm
7.62x39 = 12mm
308 = 12.6mm
300WM = 14mm
338LM = 15.9mm

To some extent it is just “common sense” really. There is also a dedicated 17/22 Hornet insert available separately for the extra small cases.

Just to confirm, .222rem is compatible with the .223 insert?

 

[Bavarianbrit]

Just to confirm, .222rem is compatible with the .223 insert?

.222 & .223 have the same case geometry just one the .223 is a few 100ths" longer.

 

[Derraco]

Just to confirm, .222rem is compatible with the .223 insert?

Yes, that’s correct.

Try to not think of the inserts as “calibre specific” rather than “thickness of case body”

Insert 1 (223) takes cases upto 10.2mm thick
Insert 2 (7.62x39) takes cases upto 12mm thick
Insert 3 (308) takes cases upto 12.8mm thick
Insert 4 (300WM) takes cases upto 14mm thick
Insert 5 (338LM) takes cases upto 15.9mm thick

 

[flatliner]

Thank you, I'll be in touch during the week

 

[trickie]

To be clear, they are not made in Australia, rather in the PRC. My understanding is the Aussie sales are assembled there as Aussies have trouble buying from China and assembled in Aus makes it much more acceptable.

 

[Derraco]

To be clear, they are not made in Australia, rather in the PRC. My understanding is the Aussie sales are assembled there as Aussies have trouble buying from China and assembled in Aus makes it much more acceptable.

These are designed and prototyped in Australia, where the company is based out of, but yes most of the manufacturing is done in China at the companies workshop there

 

[Bavarianbrit]

These are designed and prototyped in Australia, where the company is based out of, but yes most of the manufacturing is done in China at the companies workshop there

Ah OK.

 

[j.b.99]

These are designed and prototyped in Australia, where the company is based out of, but yes most of the manufacturing is done in China at the companies workshop there

No UK stock at the moment so do you know when it will be back in?

 

[Derraco]

No UK stock at the moment so do you know when it will be back in?

Got 1 coloured version still on the shelf - had a MAD run on these in the last month and I’m struggling to keep up stock with the demand!

Next batch should land mid-April but if you/anyone wants one sooner I can arrange it via express delivery, but obviously this costs more.

Apologies!

Martin

 

[force64]

Can they do a 45/70 case?

 

[Derraco]

Can they do a 45/70 case?

No reason why not!

 

[force64]

what's required?

 

[Derraco]

what's required?

To do what, sorry?

 

[force64]

You list the following inserts as being available

Insert 1 (223) takes cases upto 10.2mm thick
Insert 2 (7.62x39) takes cases upto 12mm thick
Insert 3 (308) takes cases upto 12.8mm thick
Insert 4 (300WM) takes cases upto 14mm thick
Insert 5 (338LM) takes cases upto 15.9mm thick

Are any suitable for the 45/70?

 

[j.b.99]

Insert three?