6.5 creed with 95g bullets

Steve123

Well-Known Member
As per title, has anyone achieved good accuracy with the 95g vmax in their creed moors. I have a shultz classic but so far cannot get anything great eg around an inch at 100 yards with 3 shots.
What powders and oal do people get results with. Thanks.
 
As per title, has anyone achieved good accuracy with the 95g vmax in their creed moors. I have a shultz classic but so far cannot get anything great eg around an inch at 100 yards with 3 shots.
What powders and oal do people get results with. Thanks.
Do you know what twist your barrel is?
 
I've shot 100g Lapua Scenars out of both of mine, about a 0.4" group at 100yds, the 139's are better for me.

COAL was 2.717" with 39gr Viht N150.
 
43 to 43.5gr RL15 or thereabouts works well for the 95 Vmax's loaded to 2.68 COL (3150fps or thereabouts and good accuracy (based on my 1/8 twist 24 inch barrel).
 
I use 95grain vmax federals in my tikka tx3 1/12 24 inch barrel. I can get bullet hole touching bullet hole at 100 yards. But my rifle didn’t like the actual Hornady 95grain vmax’s as much.
 
not in a creed but that really doesn't matter as its a 260 1-75 twist ( again fairly irrelevant because ant 6.5 will stabilise a bullet with a faster twist . I use 100 grain Seirra and they shoot very well.
Very much doubt its the bullet and barrel , more likely its your load in genral
 
Both the Creeds i have owned shot them really well.

Both 8 twists and both liked RL15 under the 95 vmax. This is my "go to" foxing medicine in this cal
 
Back
Top