Wanted: 6mm creedmoor or 243
- Thread starter owenlee
- Start date
@owenlee I am reluctantly preparing to sell my Sako 75 that has been re-barrelled in 6mm Creedmoor with a 1:8 twist. The barrel, reciever and moderator are in green cerakote while the bolt and trigger guard are in hunter orange. I also have 198 pieces of Lapua 6mm CM brass (small primer) that I will sell too. The rifle was purchased last summer as a .243. I had a local gunsmith re-finish the stock to clean it up and make it look like new while Barton Gunworks fitted it with a HS Precision sporter barrel cut to 22 inches. The rifle is fitted with a Barton Gunworks picattiny rail although I also have Sako bases and 30mm rings that can be fitted if preferred. I'm not sure what height the rings are, but I have fitted a HikMicro Stellar 3 SQ50 without trouble.
The rifle is deadly accurate with Sako Blade (80 grain) and VV N540 going at 3281 fps.
Having recently been made redundant, I am also selling my Winchester Model 70 fitted to a HS Precision bench rest stock and HS Precision Varmint barrel in .223 Remington also in green and orange.
The rifle is deadly accurate with Sako Blade (80 grain) and VV N540 going at 3281 fps.
Having recently been made redundant, I am also selling my Winchester Model 70 fitted to a HS Precision bench rest stock and HS Precision Varmint barrel in .223 Remington also in green and orange.
Attachments
Last edited:
A couple of months back i added a 1-8 twist .243 Tika . Its very good and for not a lot of money brand new .
been running with the Barnes 80grain but it is tough in the wind and i have been doing more with the 95 grain LRX Barnes.
Its Hard to find a Tika that doesn't shoot straight out the box
been running with the Barnes 80grain but it is tough in the wind and i have been doing more with the 95 grain LRX Barnes.
Its Hard to find a Tika that doesn't shoot straight out the box
Similar threads
