7mm PRC Powder Load Advice

[John Gruber]

I'm very lucky to have been given a large batch of 7PRC new Hornady Brass, CCI 250 Magnum Primers & 180gr ELDM heads so just wondering if any folks can recommend a powder & load that will work for these components that will go through a 26" 8 twist barrel please ?

 

[Eric the Red]

RS70, poss 76 depending on barrel length, or N165. Load needs working up with the specific brass

 

[Scuffy]

N560

 

[Rob-E]

Watching with interest I’m about to start reloading my 7mm PRC too.
I got some 150gr CX for a good price and have some N145 powder but I’m not sure if N145 will produce the results required, I read somewhere it’s a bit tame.

 

[PEA]

Watching with interest I’m about to start reloading my 7mm PRC too.
I got some 150gr CX for a good price and have some N145 powder but I’m not sure if N145 will produce the results required, I read somewhere it’s a bit tame.

Interested in the results you get with copper