Nice Tikka
Is that a Gary Cain stock or from a guy who’s name escapes me but operates from Ireland?
Think I’ve asked this before now I think about it!
K
Custom and Semi custom rifle photos/porn
- Thread starter Beastmaster.308
- Start date
Is that a Gary Cain stock or from a guy who’s name escapes me but operates from Ireland?
Think I’ve asked this before now I think about it!
K
Mine ...
.17 HMR
.223 whiz bang
6.5 creed
Vudoo
9.3 x 62 and 404 Jeffery
Few other bits and bobs but those are the only pics and the Blaser and cz are not custom but standard off the shelf jobbies
.17 HMR
.223 whiz bang
6.5 creed
Vudoo
9.3 x 62 and 404 Jeffery
Few other bits and bobs but those are the only pics and the Blaser and cz are not custom but standard off the shelf jobbies
trucraft
Well-Known Member
Thanks.
Yes Gary Kane.
Squirrelbasher
Well-Known Member
Ahh, don’t do it to me
. A pal of mine actually has two target rifles that he’s going to sell before his renewal because the target club he was a member of no longer exists. He’s got an anschutz and a bsa target rifles as well as a couple of sporting/vermin rifles in .22 rimfire. The bsa weighs a ton, but if it was cut down like yours it would make a great vermin tool. He says he wouldn’t get much if he sold it, but it’s probably going to have to go anyway. You’ve got me thinking now, there must be something that I need one for.......
trucraft
Well-Known Member
That’s some nice timber right there.
Asa-J
Member
John Gryphon
Well-Known Member
Had the boys here hunting a couple of weeks ago so i got the 338 Lap out and let them rip in the paddock.
Its custom enough, its a 98B Barrett,ten shot magazine is not fitted.
Yes he`s a cak hander on a right hand bench...bloke has shot international for the Australian Team,knows how to shoot and can do it properly too.
Shooter has his own .338 Edge but left it home and only brought his `62 a 22 and a 6mm by something haha
Just asked him,its a 6mm GT
www.outdoorlife.com
Its custom enough, its a 98B Barrett,ten shot magazine is not fitted.
Yes he`s a cak hander on a right hand bench...bloke has shot international for the Australian Team,knows how to shoot and can do it properly too.
Shooter has his own .338 Edge but left it home and only brought his `62 a 22 and a 6mm by something haha
Just asked him,its a 6mm GT
The 6 GT Is a New Top Cartridge in the Precision Rifle World
Even for hunters and shooters who don't follow precision rifle trends, the end result might be a versatile general-purpose round for predators, varmints, and smaller big game
www.outdoorlife.com
Last edited:
John Gryphon
Well-Known Member
I will add that he took the heads off the rabbits with it here until then I had no idea it existed.
GOMX
Well-Known Member
One thing for sure it’s 100% Guaranteed to make you smile, great little truck rig too …Ahh, don’t do it to me
rosslamb
Well-Known Member
Sako 75 AIII - Built by Riflecraft
7mm08
22" Proof Research Sendero profile (invisible thread protector) now wears an ASE Ultra SL5
Fluted Bolt & Tactical bolt handle
McMillan A3-5 stock (was for an AIV but re-inletted as no other SA Sako McMillans to be found)
everything cerakoated
Saved the christening of it for something a bit special, passed up a few before this lad came along as well.
My fathers old L579 in 308 never shot well, never fed cartridges well. When I got her she was re-barrelled with a LW 22" stainless 1450 profile, carbon fibre stock fitted, and AICS mag system converted to fit with aics magazines. Took me quite a while to fit and rework the bottom of the action to get the magazine to go into the right position. Now she is very accurate, feeds fantastic and worth keeping. Purely by the work involved it would have been better to just start with a T3..... then again this was my fathers rifle that he shot Kudu, Duiker and Bushbuck with. My son shot his first deer with this rifle.
edi
edi
Sako75Hunter
Well-Known Member
Great to see a rifle passed down through 3 generations, and all the history and memories attached to it too.My fathers old L579 in 308 never shot well, never fed cartridges well. When I got her she was re-barrelled with a LW 22" stainless 1450 profile, carbon fibre stock fitted, and AICS mag system converted to fit with aics magazines. Took me quite a while to fit and rework the bottom of the action to get the magazine to go into the right position. Now she is very accurate, feeds fantastic and worth keeping. Purely by the work involved it would have been better to just start with a T3..... then again this was my fathers rifle that he shot Kudu, Duiker and Bushbuck with. My son shot his first deer with this rifle.
edi
Thinking back I also shot my first deer with it. No reason why the rifle shouldn't do another two-three generations.
edi
Squirrelbasher
Well-Known Member
Shaun Goss
Well-Known Member
Great to see all these different builds, made me even more excited for receiving my first semi custom in the new year
Similar threads
