Drone pro on Blaser r8

[Overlay]

I tried a Alan Rhône Mount on my 93 and R8 and in the end I sent it back for a refund, doesn’t fit to well due to the thickness of the middle part of the mount being to proud on a Blaser Mount it scalloped out ( if that’s the right wording)

I got my Blaser Mount via Chris potter guns, but I think you can order direct from Tier 1

Clearance on a photon is the same as a day scope 30mm x 56 on mine with normal medium Rings, it lays right along the barrel

Good luck

Phil

 

[SussexFallow]

I shot a blaser and drone for a few years. I had the tier one on a blaser base the contessa and the bogdan one which was by far the best. the contessa warped and kept losing zero. The tier one worked but was high and didn't reach back as far

 

[fizzbangwhallop]

I shot a blaser and drone for a few years. I had the tier one on a blaser base the contessa and the bogdan one which was by far the best. the contessa warped and kept losing zero. The tier one worked but was high and didn't reach back as far

Yep, I’d agree with that......Bojan’s rail hasn’t moved from my R93 since I fitted it although the Drone has been replaced with one of Clive’s 75-3 thermal scopes. Checked the screws the other week for the first time in over a year and they’re still tight.

The thermal and the day scope are on and off every time the rifle is used and it’s never lost zero....I’ve only needed a one or 2 click fine adjustment when checking a new batch of reloads.


Still on fleabay...
Blaser Picatinny Rail Adaptor for R93, R8, LRS 2, K95 and S2 Back Extended 200mm | eBay

Cheers
Fizz