Stalker62
Well-Known Member
i put a schmidt- rubin 1889 on ticket in 7.5x53.5 ...
...i drilled and tapped it for a scope...
i put a schmidt- rubin 1889 on ticket in 7.5x53.5 ...
...i drilled and tapped it for a scope...
calm down !
oh don't be so dramatic

The later K31 has a nice scope rail which locates on the site of the action, so no need to drill and tap new holes, and i understand the later versions have now centralised the scope rail over the breech (mine is off-set slightly), which prevents spent cases from popping out and landing on your head during rapid reloads..calm down !
there is loads of them out there and we were testing for accuracy , it had four small tapped holes after we'd done
Did you sell the dies too?i put a schmidt- rubin 1889 on ticket in 7.5x53.5 to see what it would do and my goodness was it accurate and fast to operate !
it would shoot around an inch (i drilled and tapped it for a scope)
should never have let it go really
i don't recall , i will look tonightDid you sell the dies too?
That's precisely the posture my back got stuck in! Uncanny.
Thanks for the offer but I acquired a Lee Speed at auction last week. Picking it up at the weekend! Will share some photos.View attachment 419985
I have my 1955 303 up for sale. Still have the original stock, bayonet and scabbard.
Thanksi don't recall , i will look tonight
i did stumble upon some 5 rd speed loading clips for it , the cardboard ones the other day whilst rooting about in my reloading den




I agree with the above it’s more than likely been regulated for specific ammunition, as said trial and error and maybe some research as to what may have been used.
According to your avatar you’re in Surrey, why not try Fultons of Bisley, they may be able to help you with more details regarding ammunition and of course your slight windage problem, catch them at the right time and who knows what gems of information you may inherit.
Did your rifle come with a five round magazine, it seems to have the ten round mag, or do you have both ?
Nice rifle by the way.
NiceReally pleased with my new (old) Lee Speed! I’ve had it down at the BSRC ranges a couple of times now and it’s a lot of fun to shoot.
Whilst I’m still getting used to shooting with iron sights, I’ve noted the rifle tends to shoot high and left when shooting on paper at 100 yards.
A friend mentioned, I can probably give the front sight (photo below) a tap with a mallet to correct the windage, and then fix the elevation by adjusting my sight picture etc.
I don’t feel particularly confident taking a mallet to it so can anyone recommend a specialist gunsmith who might be able to help?
As mentioned, in my original post - I’d love to get a bit more confident with it before taking it out in the field!!
View attachment 431046
View attachment 431047
View attachment 431048
View attachment 431049