Hollow ground flat head screwdriver bits

[scrumbag]

Hi folks,

Anyone have a source for REASONABLY PRICED hollow ground, flat head screw driver bits?

(Or am I chasing rainbows)

Thanks in advance,

Scrummy

 

[User00026]

You sound like the kind of guy who shoots odd things like 257 Roberts and open sighted 9.3x62 rifles....definitely chasing rainbows

 

[scrumbag]

You sound like the kind of guy who shoots odd things like 257 Roberts and open sighted 9.3x62 rifles....definitely chasing rainbows

And 404 Jeff's on FN Commercial 98n receivers and likes things like 1892 takedown clones, SA-22s, FN Trombones...

Ah dammit, I feel an HBSA membership becoming compulsory...

But seriously, anyone got a lead on those hollow ground flat head screwdrivers?

 

[User00026]

Would the recknagel multi tool set not work? Alan Rhône can get those for you

 

[enfieldspares]

Not too difficult to make yourself from standard screwdrivers using an electric grinding wheel sold in DIY shops. Or for bits that's difficult. I'd experiment with a vice and a Dremel tool and small grinding wheel.

 

[old keeper]

Check out Wheeler Engineering (gunsmithing supplies) They should fill the bill!

 

[Mike L]

There are Chapman gunsmithing screwdriver sets on Amazon for £35, I tried a link but can't post it here.

 

[Pete1774]

B&Q if you're not a tool snob.

 

[HandB]

For £10.15 you can these from Brownells. They are specially thin blades SET BROWNELLS Browning Auto-5 Screwdriver Bits, Only - Brownells UK

 

[Sampo]

Chapman gunsmithing screwdriver sets

Chapman Screwdriver set

 

[paul o']

Have a chapman and wheeler set.:

Wheeler 954621, Professional Gunsmithing Screwdriver Set, 43 Piece, Multicolour : Amazon.co.uk: DIY & Tools

Shop at Amazon.co.uk for Wheeler 954621, Professional Gunsmithing Screwdriver Set, 43 Piece, Multicolour : DIY & Tools.

www.amazon.co.uk

 

[welshwarrior]

Grind them yourself then you know they fit properly

 

[Utectok]

Hi folks,

Anyone have a source for REASONABLY PRICED hollow ground, flat head screw driver bits?

(Or am I chasing rainbows)

Thanks in advance,

Scrummy

I just ground an old well made set of screwdrivers for gun use (slot head)

 

[enfieldspares]

I just ground an old well made set of screwdrivers for gun use (slot head)

This, again, plus one, Just had to do just that on Wednesday to take off the baseplate of a BLE as I'd mislaid the one I usually use.

 

[Heym SR20]

Followed by

 

[Klenchblaize]

Job done:


K