How to set a fridge up for storing deer

[ca11um]

Hi everyone looking for advice on how best to set up a set of fridges I have acquired for storage of roe deer in. Where about to put a rail? What kind of rail and how large diameter? Can I bore holes into it or is there a better way?


The fridges I have is 2 of the below.

Polar DM075 218 Ltr Upright Single Glass Door White Display Fridge With Canopy


Thanks in advance Everyone

 

[willie_gunn]

Hi everyone looking for advice on how best to set up a set of fridges I have acquired for storage of roe deer in. Where about to put a rail? What kind of rail and how large diameter? Can I bore holes into it or is there a better way?


The fridges I have is 2 of the below.

Polar DM075 218 Ltr Upright Single Glass Door White Display Fridge With Canopy


Thanks in advance Everyone

The fridge comes with four or five shelves.

Just put one of those in the top-most recess and then hang your deer from there.

I've had three roe hanging from mine for a week with no trouble.

To keep them from resting in the blood tray suspend them via the aitchbone either on an extended S-hook or buy a couple of @Tim.243's fridge hangers.

 

[Tim.243]

Hi everyone looking for advice on how best to set up a set of fridges I have acquired for storage of roe deer in. Where about to put a rail? What kind of rail and how large diameter? Can I bore holes into it or is there a better way?


The fridges I have is 2 of the below.

Polar DM075 218 Ltr Upright Single Glass Door White Display Fridge With Canopy


Thanks in advance Everyone

As a fabricator I re used a piece of old builders ladder in a H cut the tread in the middle and found a piece to fit in side.
tapped it through and made it to the width of the unit so it sat on a shelf moulding.
Or a couple of bits of 3x2 and drill a hole through the same size as your rail. or cut to notches out the top of them and lay the rail in them. 26mm key klamp galv pole is v strong.

 

[ca11um]

Thank you!

 

[Tim.243]

Thank you!

Welcome, if you cut a notch in the timber you can pin the tube with a wood screw and clearance hole through into the wood.

 

[ca11um]

Thanks Tim, I'll probably do that. Appreciate it and enjoy your buck season