Padded case for Kipplauf?

[Toots]

Can anyone point me in the right direction for a nice, not tactical looking take down case for a kipplauf please?
24" barrel and ideally one that will accommodate the scope still attached (about 4" extra) but not a deal breaker.
Skinner Sights folding takedown case almost fits the bill but scope would have to come off to fit. Riserva did make some nice looking ones but no longer in their line up.
Thanks in advance.

 

[Mossypaw]

I have the Skinner Sights takedown case for my Bergara BA13, plenty room for the scope (44mm objective)

 

[Toots]

Is that the folding takedown case or the AR one?

 

[Mossypaw]

It’s the folding takedown one, if I remember right it’s a ‘scabbard’

 

[Dickie]

Would something like this work

Beretta Uniform Pro Takedown Gunslip - Blue, Grey & Orange

Beretta Uniform Pro Takedown Gunslip. Take Down case with internal pocket for gun barrel, external zipped pocket and extra padding in the centre for improved protection.

www.uttings.co.uk

 

[deeangeo]

Can anyone point me in the right direction for a nice, not tactical looking take down case for a kipplauf please?
24" barrel and ideally one that will accommodate the scope still attached (about 4" extra) but not a deal breaker.
Skinner Sights folding takedown case almost fits the bill but scope would have to come off to fit. Riserva did make some nice looking ones but no longer in their line up.
Thanks in advance.

Before you write the Riserva off, contact Christine at the email address below.
I’ve bought stuff over a few years & recently, no longer listed on the Riserva website, from her.
She’s a very nice lady to do business with, very prompt too...
For info, I use a Fairfx euro € card to pay her....& she mails stuff to the UK.
Riserva stuff is good quality too.

info@christinetappeiner.it

English

www.christinetappeiner.it

RISERVA - Equipaggiamento caccia, accessori tecnici per la caccia

Dal 1980, prodotti tecnici esclusivi per la caccia e l'outdoor, progettati per durare nel tempo.

www.riserva.it

 

[greenshoots]

i used a shotgun case for mine, new hinges and catches

greenshoots

 

[Toots]

Cheers Deeangeo. It was Christine who told me the Riserva one was no longer available (very disappointingly).

Beretta one looks interesting but can't find any further info on its dimensions.

 

[Freeforester]

Not too dear to have one made by a competent saddler.

 

[Toots]

I do have to admit I've been looking today at an old canvas and (fake) sheepskin gun bag that's been lurking in the loft for years and my leatherwork kit......................................

 

[scotch_egg]

i used a shotgun case for mine, new hinges and catches

greenshootsView attachment 141140

Where does the scope fit??

 

[greenshoots]

Where does the scope fit??

does not have one, open sights

greenshoots

 

[Andy-shooter]

I built one

 

[caorach]

I use this for a shotgun, should be more than enough room for you but check the measurements to be sure, great quality and price and you couldn't build it yourself for this money:

Pick & Pluck Puzzle Foam Flightcase Twin Long

Larger version of our Pick & Pluck puzzle case

www.swanflight.com

 

[Lateral]

These people will make whatever you want, within reason.

Quality Gunslips - Category- Gunslips

 

[Freeforester]

A double leg o mutton (for a pair) I made some years back:


The dee rings through the straps were for wee padlocks (customer specified)

 

[Orion]

This one won’t break the bank.

Decathlon Shotgun Soft Case

 

[IanF]

Helpfully, not what you have asked for (!) however, my drilling fits into a tiny little flute case made by Negrini (Italy), bought online and mailed to the UK.

I trust the return to zero of the sights but, if required, a cheap airgun slip provides padded protection for the assembled rifle.

No real benefit to a partially stripped Kipplauf - the 24" barrel and sights hanging out over the chamber will make for an overly long slip IMHO.

 

[Bavarianbrit]

Helpfully, not what you have asked for (!) however, my drilling fits into a tiny little flute case made by Negrini (Italy), bought online and mailed to the UK.

I trust the return to zero of the sights but, if required, a cheap airgun slip provides padded protection for the assembled rifle.

No real benefit to a partially stripped Kipplauf - the 24" barrel and sights hanging out over the chamber will make for an overly long slip IMHO.View attachment 141509

Oh! Ah! still with original Suhler claw mounts no less, nice.

 

[Pine Marten]

Helpfully, not what you have asked for (!) however, my drilling fits into a tiny little flute case made by Negrini (Italy), bought online and mailed to the UK.

I trust the return to zero of the sights but, if required, a cheap airgun slip provides padded protection for the assembled rifle.

No real benefit to a partially stripped Kipplauf - the 24" barrel and sights hanging out over the chamber will make for an overly long slip IMHO.View attachment 141509

Now you see, that's exactly the sort of accessory that my Simson drilling is lacking! I'll look up Negrini. Thanks!