post a pic of your rifle

Borden alpine 6BR
IMG_0316.jpg
 
image.webp
300wsm
rem 700 action
42 inch Border. Barrell ( cut rifle)
MYM magnum silencer
Ai stock
coaxial rest for zeroing and load development
 
thats some sort of portable chrono bench set up feller hope that building was't ya back stop.;)
:thumb: nice test rig
 
There is only one rifle here that does it for me! and that rifle belongs to Claret Dablers, Blaser R93, I am a wood stock man and the timber on that rifle makes me go all wobbly, before anybody slates blasers yes I have one!!
 
BSA international

In 32-20 and rifle velocities fallow deer can be taken with no trouble by a careful stalker, If I cant make the shot I don't take it ..Robinter mk2 32-20.webp
 
I have three gun saves !

The small one has 18 Ruger #1's .



The medium one had about 24 Marlin 444's and a few other things when this pic was taken . Since then I've sold maybe 10 of the 444's and replaced it with a few other things .



And last but not least my large (four grown men inside ) safe .





Some have come and some have gone since those four pics were taken . But I still have a few more then I have room for !

Incidently any muzzle loaders or cap and ball pisols/revolvers you see are originals . I have no reproduction guns .
 
Last edited:
I have three gun saves ! The small one has 18 Ruger #1's . The medium one had about 24 Marlin 444's and a few other things when this pic was taken . Since then I've sold maybe 10 of the 444's and replaced it with a few other things . And last but not least my large (four grown men inside ) safe . Some have come and some have gone since those four pics were taken . But I still have a few more then I have room for ! Incidently any muzzle loaders or cap and ball pisols/revolvers you see are originals . I have no reproduction guns .
I'm impressed,
 
HI , my Rabbit gun BSA MK11 inter caliber 32-20 uses 90 gr cast bullet but always have a couple of 110 gr jacketed in case I encounter a rogue fallow Robinter mk2 32-20.webp
 
20130817_161245.webpMy new Tikka supervarmint .308, just picked it up, also ordered the GRS S/V stock at the same time.

Mod is an Atec Maxim.

Stuck it all together this evening and made up 9 rounds, boresighted it and fired 3 into 3/4" without the mod attached the mod fired another 3 into 2/3" but the POI only moved down half of an inch! Which i presume is down to the short fat barrel and light moderator.

Then adjusted the scope and the final 3 also went into 2/3".

I'm looking forward to doing some proper load development, looking good so far!
 
Back
Top