Managed to pick up a truck deer hoist at the end of last season to fit on my truck tub slide.
How to make a truck tub bed slide.
While it was solid, it was simply 40mm box section into 50mm box so didn’t turn to get a carcass easily into a tray on the tail gate.
Only one person to call @Tim.243 and a plan was hatched. It coincided with me needing to get some ammo at Eastern Sporting so the invite was greatly received.
I arrive, quick hellos and the mast is off, measured and chopped.

The 40mm pipe is cut and drilled ready for a plug.

Mated up with an internal support bar inserted, the holes plugged, the join welded and buffed up with a grinder and he is done…

The boom now swivels perfectly.

Couple of blocks of wood to stop it rolling about and we are good to go.

While it’s usable to c50kg as is - it needs a 4x2 underneath the mast to support my weight (14st) other wise the back of the slide lifts.
How to make a truck tub bed slide.
While it was solid, it was simply 40mm box section into 50mm box so didn’t turn to get a carcass easily into a tray on the tail gate.
Only one person to call @Tim.243 and a plan was hatched. It coincided with me needing to get some ammo at Eastern Sporting so the invite was greatly received.
I arrive, quick hellos and the mast is off, measured and chopped.

The 40mm pipe is cut and drilled ready for a plug.

Mated up with an internal support bar inserted, the holes plugged, the join welded and buffed up with a grinder and he is done…

The boom now swivels perfectly.

Couple of blocks of wood to stop it rolling about and we are good to go.

While it’s usable to c50kg as is - it needs a 4x2 underneath the mast to support my weight (14st) other wise the back of the slide lifts.
Last edited:






