rite, not sure about this now, so i did my 22lr first as im not to bothered if that one goes wrong, the drill bit came today so today was just drilling day,
didnt seem to drill a nice smooth hole as i was expecting, maybe my drilling skills, maybe the stock material, drilled down 15mm and my comparator is 18,7mm wide so put that in and it seemed ok ish,
now when i watche the 2 videos they used a wood and a plastic but obviously chose fat stocks as they never drilled through, mu stock is about 3mm on the bottom so will that hold it in place with the epoxy resin, there is still a flat on the cross section so that should take some glue too, rest of my 3 stocks are the same inside, hollow and cross sections, photos may show a better understanding
