Suitable motorbike for pulling deer

Leica Fortis 6 - Bright and powerful.
willowbank said:
Alfie Hagon made THE best Grass and Cinder frames....

WB
Click to expand...
I have a lovely picture of Dad & Alf chatting at Tottenham Hale at a Jap Meeting in the 90's
For any Speedway fan's
Name the rider! the flag should give it away!(not me on the Long-track bike) I went with Dad his Rider Tony Steggles to a meeting in the South of France
20250422_111957[1].webp
 
willowbank said:
And me viz a 350 Bultaco Sherpa, anyone remember world champion (trials) Bernie Shreiber, rode against him in the Dunlop Trophy back in the 70’s... unbelievable that this knackered body did that ****.

WB
Click to expand...
Bultaco 350 ! I had an Ossa 250 Mick Andrews Replica in the late 70’s and my mate had a Bultaco Sherpa 250. He traded it in for a 325 Sherpa ?? And I rode it. Frightened the life out of me. So much more grunt than the 250’s I was used to.
I also ran a section on the Scott Trial for 3 years and saw all of the gang who did that until 1981. The Lampkin brothers were always there along with other big names that I cannot recall now ….
 
Rutland lad said:
Bultaco 350 ! I had an Ossa 250 Mick Andrews Replica in the late 70’s and my mate had a Bultaco Sherpa 250. He traded it in for a 325 Sherpa ?? And I rode it. Frightened the life out of me. So much more grunt than the 250’s I was used to.
I also ran a section on the Scott Trial for 3 years and saw all of the gang who did that until 1981. The Lampkin brothers were always there along with other big names that I cannot recall now ….
Click to expand...
a mate had a TY175 then a SWM, I had a Fantic 200 and he got the 250 forward kick start and a beast compared to the 200, the days of twin shocks.
 
It weights 76kg has 8 inch wide tryres, the engine is powerful enough to pull an artic on the road, so with a mat I should be able to drag an 80+kg beast........It's got a lifan 212cc engine, 7.5hp with automatic transmission, does about 35mph, the engine is a clone of the Honda GX 200 and the parts are interchangeable or if the engine packs in it can easily be replaced, these Honda GX engines are reliable and very common
 

Attachments

  • sketch-1746947283362.webp
    sketch-1746947283362.webp
    125.6 KB · Views: 54
  • Screenshot_20250511-081828.webp
    Screenshot_20250511-081828.webp
    39.2 KB · Views: 54
Birdshot said:
It weights 76kg has 8 inch wide tryres, the engine is powerful enough to pull an artic on the road, so with a mat I should be able to drag an 80+kg beast........It's got a lifan 212cc engine, 7.5hp with automatic transmission, does about 35mph, the engine is a clone of the Honda GX 200 and the parts are interchangeable or if the engine packs in it can easily be replaced, these Honda GX engines are reliable and very common
Click to expand...
Looks good how much was it?
 
I'll be securing these ammo cans to either side of the rear chassis for storing rope, hooks and bits and pieces...... Will also be securing mounts the front and rear to hold the shooting sticks
 

Attachments

  • Screenshot_20250512-122823.webp
    Screenshot_20250512-122823.webp
    17.6 KB · Views: 15
Birdshot said:
I'll be securing these ammo cans to either side of the rear chassis for storing rope, hooks and bits and pieces...... Will also be securing mounts the front and rear to hold the shooting sticks
Click to expand...
It's gonna end up like that french military vespa!
 
You must log in or register to reply here.

Similar threads

  • Article Article
Finally!!!!!!
2
Replies
29
Views
4K
Big_Sparky
Big_Sparky
  • Article Article
A roe deer in the Scottish Borders
Replies
12
Views
5K
lambsey
L
1967spud Reloading Supplies Ltd - UK Suppliers for Reloading Equipment supplies, We also stock Bullet Heads and Bullet Cases Guns Cabinets, Night vision and much much more...
Back
Top