What bolt is this
- Thread starter Rogerp
- Start date
Is there a similar one on the forend? If so take it out & measure it - looks like a torx domed cap head.
Alternatively ypu might be able to find out what it is by looking up Tikka spares using Google - they do parts drawings that you can set the key numbers from as well as specs for bolts sometimes.
Alternatively ypu might be able to find out what it is by looking up Tikka spares using Google - they do parts drawings that you can set the key numbers from as well as specs for bolts sometimes.
trickie
Well-Known Member
you go
norcan
Well-Known Member
@Rogerp
M5 screw (standard pitch)
Head: 3 mm hex
Body length: 10 mm
Overall length: 12.5 mm
Any bicycle shop should have loads of extra 10-mm-body M5 pan-head screws, as they’re the standard fastener for 6-bolt brake rotors; these will work perfectly and are functionally identical other than (usually) having a T25 head instead of 3-mm hex.
M5 screw (standard pitch)
Head: 3 mm hex
Body length: 10 mm
Overall length: 12.5 mm
Any bicycle shop should have loads of extra 10-mm-body M5 pan-head screws, as they’re the standard fastener for 6-bolt brake rotors; these will work perfectly and are functionally identical other than (usually) having a T25 head instead of 3-mm hex.
Last edited by a moderator:
Is there is another one on the other side?
norcan
Well-Known Member
Honestly, the factory green paint is nothing special.
You could just do it yourself like @Farmer_J; I think it looks quite good. Simply add the vertical grip and wide forend if you want the full SV treatment:
Post in thread 'Tikka t3x stock'
Tikka t3x stock
Get a Boyds At-One thumbhole.
Similar threads
