Arken Zulus 5-20 RF issue

[12gsnapcaps]

Hi all.

Continued thanks to @mealiejimmy

I have updated with the new firmware.

I have set up the ballistic info in the scope, however it doesn’t seem to be ‘applying’ when I change the info (ie: in ballistic profile A, I change the BC or fps, or zero range, and whilst the numbers seem to be saved, the new ballistic calculation doesn’t actually take any effect on POI - and yes I am using the corresponding zero profile.

when I select ‘ballistic calculation’ and then range a target, it says ‘ballistic algorithm not activated’ on the screen. Could this be why? How do I activate the ballistic algorithm?

Using ballistic table mode (uploaded from my phone via Bluetooth) it does work and is spot on.

I want to use the BC via the scope itself so I can save multiple profiles for three different projectiles (8.4gn, 10.34gn & 10.5gn slug) - however I can’t do this by uploading via the Bluetooth as it only allows me to update one profile/setting at a time.

I have followed the documents mealiejimmy sent me, struggling to understand what I’m doing wrong.

Thanks all.

 

[SCB]

Hi all.

Continued thanks to @mealiejimmy

I have updated with the new firmware.

I have set up the ballistic info in the scope, however it doesn’t seem to be ‘applying’ when I change the info (ie: in ballistic profile A, I change the BC or fps, or zero range, and whilst the numbers seem to be saved, the new ballistic calculation doesn’t actually take any effect on POI - and yes I am using the corresponding zero profile.

when I select ‘ballistic calculation’ and then range a target, it says ‘ballistic algorithm not activated’ on the screen. Could this be why? How do I activate the ballistic algorithm?

Using ballistic table mode (uploaded from my phone via Bluetooth) it does work and is spot on.

I want to use the BC via the scope itself so I can save multiple profiles for three different projectiles (8.4gn, 10.34gn & 10.5gn slug) - however I can’t do this by uploading via the Bluetooth as it only allows me to update one profile/setting at a time.

I have followed the documents mealiejimmy sent me, struggling to understand what I’m doing wrong.

Thanks all.

This could provide the answer. From
12 minutes in it looks like he walks through the menu options you need but he goes through it from the start
Hope it helps
SCB

 

[12gsnapcaps]

Hi SCB,

Thanks very much for your response, however I can't see any link to a video

 

[SCB]

 

[12gsnapcaps]

Thankyou! I'll have a watch after work

 

[12gsnapcaps]

@SCB this video has explained everything and solved my problem. Thankyou so much for sharing this, it’s very much appreciated.