Andy Mauthe
Well-Known Member
Pictures please!!Just fitted the Area419 Harris conversion ready for the range work out on Saturday.
Dedicated PRS rifle ?
- Thread starter finnbear270
- Start date
The Moderator has been painted rattle can with high temp brake caliper, hence the shine (nearest best option without sending of to the Cerakote surgeon)
Attachments
I can't have three Paul.
. Just in from the range, I preshot the rifle in the fog on the moor just to get it safe for the range.
First pic walking the scope in.
Second pic twenty rounds. Scary light trigger to get used to.
First pic walking the scope in.
Second pic twenty rounds. Scary light trigger to get used to.
Last edited:
Factory Hornady 143 gn 100yards
That’s what you’d want from ELDX
Wondering how I can improve with home loads.
Have some 147 grain to try.
Have some 147 grain to try.
Maybe not improve but replicate and with a home load and it won’t cost nigh on £3 a shot
@Ronin work doing its job once again.
Maybe not improve but replicate and with a home load and it won’t cost nigh on £3 a shot
@Ronin work doing its job once again.
Tiz (sadly?) true
The above isn’t unusual with a Ronin product
The fun begins at 600 and above when Ronin has done his bit and the rest is up to us
Not the finest group in the world, but no LOP set, no cheek weld riser fitted as range was very busy ... I will need to sort the breathing & trigger to finger pad training.
. a 26mm hole, with two pulled shots, 1 o'clock & 3 o'clock.
. a 26mm hole, with two pulled shots, 1 o'clock & 3 o'clock.
These are next to try, If a good load is found, will try some through the Stalking rifle for Eskdalemuir in February 
Ronin
Distinguished Member
Not the finest group in the world, but no LOP set, no cheek weld riser fitted as range was very busy ... I will need to sort the breathing & trigger to finger pad training.
. a 26mm hole, with two pulled shots, 1 o'clock & 3 o'clock.
View attachment 395806
20 round group Steve ?
Roger, two pulled .... bit of trigger training required.
View attachment 395828These are next to try, If a good load is found, will try some through the Stalking rifle for Eskdalemuir in February
10 at each weight is some dedication. I would probably have gone with 5. I’m also going to be THAT person and say half grain between weights is a large step.
Usually gives an idea which way to go.
When I did load dev for my Ronin made 6.5, I quickly discovered that looking at results from 100m wasn’t providing the differential outcomes I was seeking
I had to move back to 400 to start seeing differences in loads
I had to move back to 400 to start seeing differences in loads
Similar threads
