Fox classic hunter .270

[benj85]

Hi there does anyone have any load data for classic hunter 130gr fox bullets. The fox data only gives 1 load using N160 I already have N160 and N150. Any advice would be most appreciated.

 

[Scipio]

Hi there does anyone have any load data for classic hunter 130gr fox bullets. The fox data only gives 1 load using N160 I already have N160 and N150. Any advice would be most appreciated.

i believe @Edinburgh Rifles might well have some info on their website

 

[Scipio]

And So might xxlreloading tbh.

 

[paulbshooting]

I use the fox load data with N160 and it worked well. Edinburgh rifles use a slighty different load and OAL, which also works.

 

[Edinburgh Rifles]

We had to change the factory load to accommodate the slightly shorter Blaser chamber spec with the ogive profile

Our factory load uses 56gr N560 at 79.0mm to the tip
It was originally 79.5mm
Both very accurate in my sako that we developed them in

The length between 79.0-79.5mm is fine in any rifle

Swapping to N160 is easy and allows some headroom
They are not fussy in the slightest
N160, N560, N560, RS70, etc etc
55-57gr
Over 3000fps MV


Drop me a line and we can run a quickload for any powder

 

[benj85]

Thankyou will give that a go, load is for a standard tikka.